Subscribe to Our Youtube Channel
Related Manuals for STI CMCP547
Summary of Contents for STI CMCP547
- Page 1 OPERATION MANUAL CMCP547 DIFFERENTIAL EXPANSION TRANSMITTER CMCP547A DIFFERENTIAL EXPANSION MONITOR REV. A...
- Page 2 The CMCP547 requires externally supplied DC power. The power supply should have a nominal output of +24Vdc and be capable of supplying a minimum of 55mA for each CMCP547 in the system, or 90mA for each CMCP547A in the system. A linear-regulated, +24Vdc power-supply dedicated to the machine monitoring system is recommended.
- Page 3 30 seconds before the unit returns to the "OK" condition and the "OK" LED turns back "ON". Full Scale Range: The CMCP547 comes factory set calibrated to the full-scale range specified at the time of order. Option: Range: 0 –...
- Page 4 Buffered Output: The CMCP547 provides buffered access to probe driver output voltage via a BNC connector on the front of the unit. This output has the same sensitivity and units as the transducer itself, ie: the same mv/mil.
- Page 5 DIN rail mounting foot at the back of the unit and gently leverage the blade to begin separating the cover from the rest of the unit. Carefully work your way around to the front of the CMCP547 OPERATION MANUAL PAGE 5...
- Page 6 IF THE UNIT IS CLOSED WITH THE BEND TOWARDS THE BACK, THE RIBBON CABLE CAN BE DAMAGED. CMCP547 OPERATION MANUAL PAGE 6...
Need help?
Do you have a question about the CMCP547 and is the answer not in the manual?
Questions and answers