Using Aquarius with your Smartphone
In the BT-in mode you can pair your smartphone to Aquarius. This will allow you
to listen to music, or other audio content like podcasts, from your smartphone in
higher fidelity using the Aquarius speaker system instead of your tiny smartphone
speakers. When paired, your smartphone can control the volume, next song,
previous song, pause/play, the same as when you are playing music content on
your phone. Battery status can also be monitored on your smartphone widgets.
TO PAIR AQUARIUS TO YOUR SMARTPHONE:
1)
Turn on Aquarius with the Power Button on the panel, or on the remote
2)
Put Aquarius in the BT-in mode (smartphone icon)
3)
Turn on Bluetooth on your smartphone
4)
Select the Aquarius Bluetooth device on your smartphone
Note: Only one Bluetooth device can be selected at a time. The blue light will flash
when preparing to pair, and go solid when paired. You will hear a "connect tone"
when paired. When paired to your smartphone the built-in Aquarius microphone
allows Aquarius to work as a speakerphone, press the round button on the
Aquarius panel to answer phone calls.
Using Aquarius with your Bluetooth Headphones
In the BT-out mode you can pair your BT headphones (or other BT device) to
Aquarius for private listening. The Aquarius generated sounds will be transmitted
to the paired BT device, the Aquarius speaker system and headphone jack will be
muted in this mode.
TO PAIR AQUARIUS TO YOUR BT HEADPHONES:
1)
Turn on Aquarius with the Power Button on the panel, or on the remote
2)
Put Aquarius in the BT-out mode (headphone icon)
3)
Place your Bluetooth headphones close to Aquarius
4)
Turn on Bluetooth on your Bluetooth headphones
5)
Aquarius will pair to the closest device (in this case your headphones)
Note: The blue light will flash when preparing to pair, and go solid when paired.
You will hear a "connect tone" when paired.
Turning Bluetooth Off
Once connected to Aquarius in either BT-in or BT-out mode, to disconnect
Aquarius from your external devices change back to BT-off mode by pressing the
appropriate button: On the Aquarius remote control press the selected Mode
Toggle Button. On the Aquarius front panel, press the Bluetooth Button until the
lights above the smartphone and headphone icons are both off.
Appendix
10