Table of Contents
Advertisement
38
Code
Key name
SEARCH REV
Function In test mode
Explanation
Moves the pickup position toward the inner diameter of
the disc,
When this key is pressed with the tracking
servo in a closed loop, the tracking servo automatically
goes into-an open loop. Since the motor does not auto-
matically stop at the mechanical end point in test mode,
be careful with this operation.
Carriage reverse
(inwards)
MANUAL
SEARCH FWD
Carriage forward
Moves the pickup position toward the outer diameter of
(outwards)
the disc.
When this key is pressed with the tracking
servo in a closed loop, the tracking servo automatically
goes into an open loop. Since the motor does not auto-
matically stop at the mechanical end point in test mode,
be careful with this operation.
STOP
Stop
Switches off all the servos and initialized.
The pickup remains where it was when this key was
pressed.
OPEN/CLOSE
Disc tray open/close
Open/close the disc tray. This key is a toggle key and
open/close tray altenately.
Pressing this key when the disc is turning stops the disc,
then opens the tray.
This key operation does not affect the position of the
pickup.
Advertisement
Table of Contents
