Related Manuals for Anova CG2660
Summary of Contents for Anova CG2660
- Page 1 Instructions and user manual CG2660 Millasur, SL. Rúa Eduardo Pondal , nº 23 - Pol. Ind . Sigüeiro 15688 - Oroso - A Coruña 981 696465 www.millasur.com...
- Page 2 ANOVA would like to congratulate you for having chosen one of our products and guarantees you the assistance and cooperation that has always distinguished our brand over time. This machine is designed to last many years and to be of great use if used in accordance with the instructions contained in the user manual.
-
Page 3: Table Of Contents
CONTENT 1. FIGURES 2. SYMBOLS 3. SAFETY INSTRUCTIONS 4. GENERAL INSTRUCTIONS 5. TECHNICAL DATA 6. DESCRIPTION 7. USE 8. MAINTENANCE 9. TROUBLESHOOTING 10. WARRANTY 11. ENVIRONMENT 12. EXPLODED 13. EC DECLARATION... -
Page 4: Figures
1. FIGURES... -
Page 6: Symbols
2. SYMBOLS WARNING READ THE INSTRUCTIONS BEFORE USING WEAR PROTECTIVE GLASSES WEAR APPROPRIATE HEARING PROTECTION WEAR PROTECTIVE HELMET USE SAFETY GLOVE WEAR PROTECTIVE FOOTWEAR DANGER OF BURNS ON HOT SURFACES IRE DANGER APPROVAL ACCORDING TO CURRENT REGULATIONS... -
Page 7: Safety Instructions
PROTECT THE MACHINE FROM MOISTURE MOKING OR HANDLING FIRE NEAR THE MACHINE IS PROHIBITED ISPOSE OF THE PRODUCT ACCORDING TO LOCAL RECYCLING REGULATIONS 3. SAFETY INSTRUCTIONS • Avoid cutting near power lines. • Wear appropriate clothing. Do not wear • The equipment must only be used for its loose clothing or jewelry. - Page 8 - Check the machine for damage. a stone, the edge of the blade can grab the - Check and tighten loose parts. material and the bar will push in the - Repair any damaged parts or replace them opposite direction of the working direction. with original spare parts.
-
Page 9: Technical Data
5. TECHNICAL DATA 7.1. Expected use YPE OF MOTOR The hedge trimmer is intended for cutting 2 stroke - air ventilated ISPLACEMENT pruning shrubs and ornamental plants 25.4cc _ in private gardens. OWER 0.65 kW 7.2. Before using MAX RPM 11,500/min •... - Page 10 • Only refuel with fuel in a well-ventilated position.5. Pull the starter cable slowly until area, at a safe distance from any fire source it latches, and then pull quickly. Let the or equipment that may produce sparks and starter handle return to its original position other sources of heat.
-
Page 11: Maintenance
mechanism does not move when the engine angle is 45°. is idling . 2. Round the base of the cutting edge. 3. Do not use water when you are sharpening the blades. 7.9. vertical cut see FIG5 1. Start by cutting the sides of the hedge, making a vertical cut. - Page 12 8. Carefully screw the spark plug in by hand. packaging with appropriate protection during 9. When it seats, tighten the spark plug with transport. Empty the fuel tank before carrying the hedge trimmer in a wrench.10. Put the cover vehicle to avoid the risk of leaks.1. Place the again .
-
Page 13: Troubleshooting
9. TROUBLESHOOTING Problem probable cause Required action Clogged air filter Clean or replace Clogged fuel tube Clean or replace carburetor failure Contact your point of sale Fuel mixture too rich in gas Adjust the carburetor Switch off Put the switch in position I The engine stops, is difficult or impossible to start electrical failure... -
Page 14: Exploded
12. EXPLODED CG2660... -
Page 15: Ec Declaration
In the event that the machine is modified and this modification is not approved by the manufacturer and communicated to the distributor, this declaration will lose its value and validity. Machine name: HEDGE TRIMMER CG2660 Model: Recognized and approved standard to which it complies: Directive 2006/42/EC...
Need help?
Do you have a question about the CG2660 and is the answer not in the manual?
Questions and answers