Advertisement
Components
Wall mounting unit.............................................................1
Insulating spacer
....................................4
Points to note for installation
•
The wall mounting unit is for use in installing the wide plasma display to a vertical wall for
viewing purposes. Do not use it for any type of installation other than vertical wall
installation.
•
In order to ensure correct, problem-free operation of the wide plasma display, do not
install the display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
•
When installing this wall mounting unit, use a fixing method appropriate to the type of wall.
•
Use an M6 bolt (sold separately) appropriate for the type of wall material (wood, steel
frame, concrete, etc.) the bracket is to be mounted on.
•
Insert the power cord plug for the wide plasma display into a wall outlet which is close and
easily accessible.
•
Provide adequate ventilation so that the temperature around the display does not rise
above 40°C (104 F°). If there is insufficient movement of the air inside display, heat may
build up inside the display, and fire may result.
Toothed pan washer
....................................4
Allen key (accessory) ......1
M5 screw .........................2
(Fixing screw)
Pan head bolt with
hex socket (M8-45) .........4
3
Advertisement
