Subscribe to Our Youtube Channel
Related Manuals for Regal Rexnord MARLAND CLUTCH CECON CEUS Series
Summary of Contents for Regal Rexnord MARLAND CLUTCH CECON CEUS Series
- Page 1 Completely Enclosed Continuous Operation CEUS & CEUSD-Series CECON + Clutches ® Service & Installation Instructions P-8834-MC...
-
Page 2: Installation
Failure to follow these every two weeks. instructions may result in product damage, If the unit is to be immediately installed and operated equipment damage, and serious or fatal injury to upon its arrival at the site, proceed with the installation personnel. - Page 3 Be sure the free rotation is in It is important that the alignment of the CECON+ the desired direction. unit shafts with the shafts of the driver and driven equipment be rechecked after the final tightening B. Drain Valve and Static Oil Gauge of the mounting bolts, and before installation of the Install the drain valve and static oil level sight gauge coupling halves is complete.
-
Page 4: Lubrication Maintenance
should be made before placing the CECON+ unit individual experience. However, it is considered into continuous operation. desirable to sample the lubrication several times at weekly intervals after the unit has been placed in Note: Oil level in the “running oil level” gauge operation. - Page 5 Disconnect/Connect Option 3. Move the shift lever (Part No. 22) to the connect position as tagged on the housing cover. CECON+ Clutches can be ordered in a configuration 4. Verify that the unit is connected by viewing the (CEUSD) that allows lockout/tagout of the driver location of the shift pin through the sight glass in accordance with OSHA requirements without (Part No.
- Page 6 CECON+ DIAGRAMS AND PARTS LIST PARTS LIST ITEM DESCRIPTION MATERIAL HOUSING CAST IRON INPUT SHAFT ALLOY STEEL SHAFT SEAL COVER CAST IRON BEARING CAGE CAST IRON INSPECTION COVER STEEL ALLOY STEEL ROLLER CAGE ASSEMBLY ALLOY STEEL/ALUMINIUM OUTER RACE ALLOY STEEL BEARING SPACER ALLOY STEEL BEARING...
- Page 7 PARTS LIST ITEM DESCRIPTION MATERIAL BREATHER FILTER ALLOY STEEL SQUARE HEAD PLUG ALLOY STEEL CEUS DESIGN – TOP VIEW PARTS LIST ITEM DESCRIPTION MATERIAL RUNNING OIL LEVEL GAGE ALLOY STEEL/GLASS STATIC OIL LEVEL GAGE ALLOY STEEL/GLASS 1 1/2” DRAIN VALVE STAINLESS STEEL CLUTCH ROTATION VIEWED FROM THIS END (INPUT END)
- Page 8 PARTS LIST ITEM DESCRIPTION MATERIAL BREATHER FILTER ALLOY STEEL SQUARE HEAD PLUG ALLOY STEEL SIGHT GLASS ALLOY STEEL SHAFT LEVER ALLOY STEEL LOCK COVER ALLOY STEEL MASTER LOCK ALLOY STEEL CEUSD DESIGN – TOP VIEW 8 Marland Clutch • 800-216-3515 P-8834-MC •...
- Page 9 NOTES Marland Clutch • 800-216-3515 P-8834-MC • 1/20 9...
-
Page 10: Warranty
Warranty Marland Clutch warrants that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which proves to be defective in material or workmanship within a period of three (3) years from date of shipment. This warranty extends only to the original purchaser and is not transferable or assignable without Marland Clutch’s prior consent.
Need help?
Do you have a question about the MARLAND CLUTCH CECON CEUS Series and is the answer not in the manual?
Questions and answers