Advertisement
The following MIDI functions can he set.
The DIGITAL
EFFECT
button and some of the
SOUND
buttons, when used in conjunction with
the MODE SET button, serve to set the following
MIDI functions.
corresponds to the selected sound as
indicated on the panel (default status).
«|n the initialized state, the MIDI channel and sound assignment that can be used
on this instrument is as shown below (PX554: the ORGAN
PRESETS becomes
the sound that is selected at that time).
PX552
SOUND
РРЕ
GRAND © UPRIGHT
ЕРАМО1
EPIANO2
НААРЫ
уз
STRINGS
ORGAN
o
o
o
o
o
o
о
—
рм
—
PX554
SOUND
perd
jure
EPANO1
ЕРАМО2
HARPSI
ves
FANS
WEN.
ШШЕ
ШП!
eWhen the power is turned on or when this instrument is initialized, the sounds
|
Function
|
on (when indicator is lit)
off (when indicator is not lit)
The piano can be used as a multiple | This piano cannot be used as a multiple
MULTI
TIMBRE
for each channel that were changed by receiving PROGRAM
CHANGE numbers
return to the sounds indicated on the panel.
sound
generator,
and
data
can
be
sound generator. Data can be received
Data is received for all MIDI channels.
|Data is received only on MIDI channels
| which are matched (default status).
eFor assigning
this instrument's
MIDI
| channels, refer to page 19.
|
received on each MIDI channel.
only on the set MIDI basic channel. In
this
case,
the
produced
sound
PROGRAM
CHANGE
data
is PROGRAM
CHANGE
data is not |
transmitted/received (default status).
transmitted/received.
e You can also transmit data for any
|
PROGRAM
PROGRAM CHANGE number.
|
CHANGE
(Refer to page 22.)
|
e Please refer to page 22 for information
about the program change number of
|
each sound button.
Pedal
operation
data
is transmitted/ | Pedal operation data is not transmitted/
| "
PEDAL
à
received (default status).
received.
EFFECT
The DIGITAL
EFFECT
on/off status is | The DIGITAL
EFFECT on/off status is
transmitted/received (default status).
not transmitted/received.
|
When
this instruments
TRANSPOSE | When
this instruments
TRANSPOSE
function is active, note numbers
of the | function is active, note numbers of the
TRANSPOSE
transposed notes are transmitted.
played keys (non-transposed notes) are
transmitted (default status).
The performance
from this instrument | The performance
from this instrument
|
also sounds from this instrument (default | does not sound from this instrument. Set
LOCAL
ae
|
CONTROL
status).
to off when this instrument is to be used
eWhen
the POWER
is turned on, the | only
to
transmit
data
to
connected
LOCAL CONTROL is set to on.
equipment.
e
MULTI TIMBRE and OMNI ON cannot both be turned on at the same time.
20
Advertisement
