Advertisement
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE SCREWS.
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The
lightning flash with arrowhead
symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous
voltage"
within
the
product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRICAL
SHOCK,
DO NOT
EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
The exclamation point within an equilateral tri-
angle
is intended
to alert the
user
to the
presence
of important
operating
and
main-
tenance (servicing) instructions in the literature
accompanying the appliance.
BEFORE YOU PLAY, PLEASE READ THE CAUTION-
ARY COPY APPEARING ON PAGE 4.
Note: This equipment
has tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may
cause
harmful interference to radio communications.
However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
MODEL NUMBER
radio or television reception which can be determined by turning
The model number of this product is found on the rear of the
unit.
The model number and serial number are found underneath
the keyboard.
Please note the model and serial numbers in the space provided
below and retain this sheet as a permanent record of your
purchase to aid identification in the event of theft.
the equipment off and on, the user is encouraged to try to correct
| SERIAL NUMBER
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase
the
separation
between
the
equipment
and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Advertisement
