Operating The Lawn Mower - Stihl RM 443.3 T Instruction Manual

11 Operating the Lawn Mower

► Measure the following:
– Thickness a
– Width b
– Sharpening angle c
► If the minimum thickness or minimum width is
fallen below: replace the blade,
► If the sharpening angle is not correct: sharpen
the blade, 19.2.
► If anything is unclear: consult a STIHL special‐
ist dealer.
11 Operating the Lawn Mower
11.1 Holding and Guiding the Lawn
Mower
► Hold the handlebar with both hands so the
thumbs enclose the handlebar.
11.2 Setting the cutting height
7 different cutting heights can be selected:
– 20 mm = Position 1
– 30 mm = Position 2
– 40 mm = Position 3
– 55 mm = Position 4
– 70 mm = Position 5
– 85 mm = Position 6
– 100 mm = Position 7
The positions are indicated on the lawn mower.
Setting the cutting height
► Shut off the engine.
The blade must not be turning.
► Place the lawn mower on a level surface.
► Hold the lawn mower securely by the grip (1).
► Press the lever (2) and keep it pressed.
0478-111-9661-A
► Move the lawn mower to the desired position
by lifting and lowering it.
The current cutting height is indicated at the
cutting height indicator (3) with reference to
the marking (4).
19.2. ► Release the lever (2).
The lawn mower engages in position.
11.3
11.3.1
► Place the lawn mower on a level surface.
► Start the engine.
► Pull control bar for self-propulsion (1) fully in
the direction of handlebar (2) and hold so the
thumb encloses the handlebar.
The lawn mower starts moving.
11.3.2
► Release the control bar for self-propulsion.
► Wait until the lawn mower comes to a stand‐
still.
11.4
The lawn mower is equipped with a multi-blade
and can be used for mowing or mulching.
► If working with self-propulsion engaged: drive
the lawn mower forwards in a controlled man‐
ner.
► If working with self-propulsion disengaged:
Push the lawn mower forwards slowly and in a
controlled manner.
Engaging and Disengaging
Self-propulsion
Engaging Self-propulsion
Disengaging Self-propulsion
Mowing and Mulching
English
33