Yamaha MD4S Owner's Manual page 31

Simultaneously monitoring the
recording source and the track
playback
6
While playing the audio source that you wish
to record, raise the CUE LEVEL control of
input channel 2.
Use the CUE LEVEL control of input channel 2 to
adjust the monitor level of the signal that will be
recorded on track 2. While listening to the sound
in your headphones or monitor speakers, adjust
the monitor level as desired. If you begin record-
ing now, the playback sound from track 1 will be
mixed with the track 2 recording source, and can
be monitored via the CUE bus.
Start recording
7
Press the PLAY button to begin recording.
When you finish recording, press the STOP but-
ton.
2
1 2
GAIN GAIN
LINE MIC LINE MIC
MIC/ MIC/
LINE LINE
PB PB
CUE bus
FLIP FLIP
CUE CUE
P P
A A
N N
L R L R
L L
E E
V V
E E
L L
0 10 0 10
HIGH HIGH
–15 +15 –15 +15
MID MID
–15 +15 –15 +15
LOW LOW
–15 +15 –15 +15
AUX AUX
1 2 1 2
PAN PAN
L R L R
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0 0
1 2
Signal flow during overdubbing
Listen to the recording
8
Press the LAST REC SEARCH [IN] button to
move to the location where you began
recording track 2.
If you wish to start listening from the beginning of
the song, press the SONG SEARCH [
9
Press the PLAY button to playback, and listen
to the recording.
0
If you are satisfied with the recording, press
the REC SELECT 2 button.
The track 2 track recording indicator (DIR) will
go dark.
Go ahead and record the remaining tracks 3 and 4
by overdubbing in the same way.
MONITOR
OUT
L
PHONES
R
Track 1
Track 2
Track 3
Track 4
31
Overdubbing
] button.
—Owner's Manual