With the product warranty card, valid invoice or/and other valid certificates for purchasing the product, users can enjoy the product within the valid period. In order for you to enjoy the warranty support of CAMMUS, please do not artificially damage the machine, and do not operate the machine or system abnormally under the guidance of the official or official authorized...
Damaged due to user behavior (self-refitting, repairing, or dismantling, refitting, repairing, etc. by a third party not authorized by CAMMUS). Software failure of peripherals or accessories that are not configured by the product itself and cause product failure. The use of third-party software that is not pre-installed on the product fails and causes product failure.
Page 16
Note In order for you to use the CAMMUS C12 more safely and effectively, please be sure to read this instruction manual carefully before installa- tion and use. It contains important product and safety information;...
Hardware installation Install the cooling fan to the upper plate of the desktop bracket with the corresponding screws. Desktop bracket chute upper plate Inner cross pad screw M3X20*2 Cooling fan Fasten the lower plate of the desktop bracket to the desktop bracket with 4 corresponding screws.
Connect the whole steering wheel to the steering wheel bracket through 4 corresponding screws, then insert the connected integral steering wheel assembly into the upper plate of the desk- top bracket through the chute, and connect it with 4 correspond- ing screws to complete the installation of the desktop steering wheel.
Page 19
12-gear knob mode to plus or minus gear mode, or you can switch gear mode in the CAMMUS desktop application interface. Note: None of the function keys have preset functions. Please customize the functions in the game before using them.
Page 20
Interface details on the back of the steering wheel: For interface details, please refer to the drawing description, as shown in the figure; ① ② ③ ⑤ ⑦ ⑥ ⑧ ① RES: reset button ② reserved port ③ Indicator light ④...
Please note that there is areset button on the left sideof the C12 power button, sobe careful not toaccidentally touch it. Shut down: Press and hold the power button for 3-5 minutes. All the lights on the steering wheel will go out, indicating that the machine is shut down.
Page 22
CAMMUS desktop download and installation 1.Desktop download Enter CAMMUS official website (https://cammusracing.com/down loads/) to download the latest desktop and install it. (CAMMUS official website →download → click the latest desktop driver to download ) 2.Desktop installation ①Install according to the installation prompt;...
Page 23
Software introduction and equipment setting After the device is connected, open the installed desktop, check the device connection status on the home page → select the steering wheel on the device page to set the center of the steering wheel → set the mechanical return value of the base on the parameter page →...
Page 24
③Equipment: Mainly check and set the working status of each device, including equipment settings such as handbrake, steering wheel, pedals, and dynamic seats. Enter the steering wheel interface and set the center of the steering wheel. ④Set the maximum/minimum value of the pedal: Enter the pedal setting interface, click the minimum value of the accelerator, and wait for the prompt that the setting is successful.
Page 25
Complete the basic settings of steering, pedals and paddles to meet the needs of the game. All CAMMUS steering wheel keys can be customized, and players can set other keys in the game according to their own preferences.
Page 26
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 27
合格证 CE R TI FI CA TE Prod uct num ber Inspec to r: Prod uct ion Da te:...