FEATURES AND CONTROLS
XLR Input
Jacks
The Hum Eliminator e ectively addresses the common issue of 60Hz AC hum caused by ground loops, which act as
radio antennas (loop antennas). By breaking the ground loop, this device eliminates the possibility of signal lines
picking up AC hum and noise. Unbalanced lines are inherently more susceptible to picking up electrical noise and
RF interference compared to balanced lines. Additionally, the longer the unbalanced cable, the higher the likelihood
of encountering such problems. Utilizing this device to connect two pieces of equipment presents one of the most
cost-e ective solutions for converting between unbalanced signals and true balanced signals.
Furthermore, the Hum Eliminator automatically translates signal voltages to match di erences in ground potentials.
Features and Technical Specs:
•
60 Hz Noise RemovaL
•
Removes AC Hum Noise
•
Breaks Ground Loops Safely
•
Maintains Highest Sonic Quality
•
Passive Device: No Power Required
•
High-Performance Ultra-Compact Design
•
1/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels
•
Audiophile High-Quality Components and Exceptionally Rugged Construction
•
Automatically Converts Unbalanced to Balanced Signal Without Any Signal Loss
•
Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines
•
Automatically Translates Signal Voltages to Match Di erence in Ground Potentials
•
Dimensions (W x D x H): 7" x 6" x 2.5"
Questions or Comments?
We are here to help!
Phone: 1.718.535.1800
PyleUSA.com/ContactUs
XLR Output
Jacks
www.PyleUSA.com