GENERAL INTRODUCTION 1.1 Overview The Vecow PE-2001H is a full-height PCIe card that integrates 1 GigE LAN and ® Type 4 PoE capability. Powered by the built-in Intel Ethernet Controller I210 and featuring high-power PoE with a max 100W power output, the PE-2001H supports gigabit data rates of 1Gbps/100Mbps/10Mbps.
CN 2 PoE Power LED LED 1 PoE Power LED PE-2001H is equipped with one IEEE 802.3bt PoE ports for transmitting power as much as 100W / 54V per port and 10/100/1000Mbps data signals over standard Ethernet CAT-5/CAT-6 cable. ®...
Page 9
2.2.2 Power Input The PE-2001H is also equipped with one 6-pin power plug for additional power supply. For most cases, the power obtained from PCIe bus is sufficient for the PoE devices, and you do not need to supply extra power to the card. In case the external power is needed, you can use 6-pin ATX power connector .
DRIVER INSTALLATION AND SETTING 4.1 Driver Installation 4.1.1 PE-2001H Install Driver This section describes : How to install drivers for PE-2001H PoE Card. System OS : Windows 10-64bit Step 1. Execute " Wired_driver_28.2_x64.exe" and then go "OK" step. Step 2. Installing Drivers.
4.2 Jumbo Frame 4.2.1 PE-2001H Jumbo Frame ® After installing the driver for Intel I210 controller, you can get the enhance function that called jumbo frame, please find more instruction as below. Step 1. "Right-click → Device Manager → Network adapters".
Page 21
For further support information, please visit www.vecow.com This document is released for reference purpose only. All product offerings and specifications are subject to change without prior notice. No part of this publication may be reproduced in any form or by any means, electric, photocopying, or recording, without prior authorization from the publisher.