Operation - Yamaha ICP1 Owner's Manual

Frame Plate and Control Panel Installation
n Make sure that the AC adaptor is unplugged from the AC mains during installation.
1
Screw the frame plate to the terminal box.
n • Terminal box not included. Use a standard (US-type) wall box: 3-gang with a depth of 44 milimeters
or more.
• The screw heads should extend from the frame plate by no more than 3 millimeters.
2
Screw the control panel to the frame plate.
n Tighten the screws used to attach the control panel to the frame plate with a torque of less than 1.5 Nm.
Control panel unit
J J J J

Operation

Refer to the DME64N/24N Owner's Manual for ICP1 operation.
1
2
Frame plate for ICP1
ICP1 Owner's Manual
7