Related Manuals for Orava LR-200
Summary of Contents for Orava LR-200
- Page 1 Lint remover LR-200 Instruction manual Dear Costumer, thank you for purchasing our product. In order to be able to use it safely and effectively, please read this instruction manual carefully. LR-200...
-
Page 2: Safety Instructions And Warnings
1. SAFETY INSTRUCTIONS AND WARNINGS • Before using the appliance for the fi rst time, read the user manual carefully and make sure you have read all the instructions. • There is a risk of injury if the user manual and the instructions given in it are not followed. - Page 3 • Never use the appliance/power supply if it is damaged, dropped on the ground, in water, if it is not working properly. In such cases, contact the service center to check the safety of its use. • Do not attempt to repair the appliance yourself or modify it in any way, contact a specialized service.
- Page 4 • Do not place the switched-on appliance on soft surfaces that could be damaged by the hot parts of the appliance (e.g. linen, carpets, bed, towels). • Do not modify the surface of the appliance in any way. • If the device is overloaded or used in extremely high temperatures, electrolyte may leak from the battery.
-
Page 5: Parts Description
Parts description 1 Button 1 (off/on/speed setting) 2 Power USB-C connector (connection of the supplied cable and a suitable AC power adapter) 3 LED display 4 Lint tray 5 Knives 6 Planchet 7 Attachment for higher cutting height 8 Cleaning brush 9 USB-C charging cable... -
Page 6: Using The Device
Charging 1. Turn off the power switch. 2. Plug the USB-C connector of the supplied cable into the power USB-C connector on this device and the other USB connector into the USB connector on the optional AC adapter (DC output voltage 5V, 500-1000mA). Plug the AC adapter into an electrical outlet. - Page 7 4. You can set a higher speed by pressing button 1 again. 5. Turn off the device by pressing button 1 again. The display goes out. Warning! • Do not press too hard on the fabric, it could damage the fabric.
-
Page 8: Cleaning And Maintenance
3. Removing lint from thin fabrics Fold the garment into two layers and stretch it on a fi rm board. 4. Removing lint from wrinkled fabrics Always straighten creases. If the fold cannot be straightened, avoid it. 5. Removing lint from structured patterned fabrics Remove lint by sliding along the plastic pattern. - Page 9 The declared value of the noise emission of this appliance is 73 dB (A), which represents level A of the acoustic power with respect to the reference acoustic power of 1 pW. Accessories: LR-200 1 pc Charging cable 1 pc...
- Page 10 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Dispose of used packaging material at a municipal waste disposal site.
Need help?
Do you have a question about the LR-200 and is the answer not in the manual?
Questions and answers