Subscribe to Our Youtube Channel
Related Manuals for mxr Iso-Brick Pro
Summary of Contents for mxr Iso-Brick Pro
-
Page 2: Basic Operation
Basic Operation Specifications Power The MXR Iso-Brick Pro Power Supply operates on ® ™ a universal input range of 100–240V~ 50/60 Hz 1.5A Directions 100–240V~ 50/60 Hz 1.5A Input 1. Plug the included IEC power cord into the IEC input jack. - Page 3 (2) 9V DC outputs @ 500mA accommodates everything from the M242. Specifically, you should check the following specs low-current pedals such as the MXR Distortion+ to unusually indicated near the M242’s output jacks: high-current pedals, including select units such as the Line 6 DL4 MkII, Chase Bliss Preamp MKII, and Darkglass ADAM Voltage: Pedal’s voltage requirement should match unless...
- Page 4 IEC input is unobstructed with moisture, does not operate normally, or has been dropped. as much clearance as possible. Attach Iso-Brick Pro Power Supply to (14) When mounting the unit, ensure that the area around the AC IN is unobstructed pedalboard with four flange-head screws (bag B).
-
Page 5: Fcc Compliance Notice
FCC Compliance Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the Iso-Brick Pro and is the answer not in the manual?
Questions and answers