Advertisement

Quick Links

Chateau 5G R16
Chateau 5G R16
(
D53G-5HacD2HnD-TC&RG520F-EU
)

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the
general public.

Quickstart

Please follow these quick steps to set up your device:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5G R16 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chateau 5G R16

  • Page 1 Chateau 5G R16 Chateau 5G R16 D53G-5HacD2HnD-TC&RG520F-EU Safety Warnings Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. Ultimate disposal of this product should be handled according to all national laws and regulations.
  • Page 2 Insert micro SIM card into the slot located under the device; Connect your computer to one of the Ethernet ports; Connect the power adapter to the DC jack; Once the device is powered on and PC connected to the device, open http://192.168.88.1  in your web browser to start the...
  • Page 3 Connect to the wireless network. SSID starts with MikroTik and has the last digits of the device's MAC address. Open application. By default, the IP address and user name will be already entered. Click Connect to establish a connection to your device through a wireless network. Choose Quick setup and the application will guide you through all basic configuration settings in a couple of easy steps.
  • Page 4 Reset button. Powering DC jack 2.0 mm. Five Gigabit ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices. USB type-A. SIM slot for Micro sim card. Mode button. Cover for external SMA antenna connector is not provided for models with antennas.
  • Page 5 We recommend checking for updates frequently to receive the latest updates for your RouterOS software to ensure the best performance and stability. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help .
  • Page 6 SIM card slot is designed to use with Micro SIM cards. Nano SIM cards have different thicknesses, usage with an adapter is not recommended. Reset button The reset button has three functions: Hold this button during boot time until the LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode.
  • Page 7 Continue to pry it open by going up; At the end lift off the whole backplate. Operating system support The device supports RouterOS software version v7. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in designated waste disposal sites.

This manual is also suitable for:

D53g-5hacd2hnd-tcRg520f-euD53g-5hacd2hnd-tc&rg520f-eu

Table of Contents