XRACK FH-BR-HM Owner's Manual And Safety Instructions

Front receiver hitch for bronco 6 gen.

Advertisement

Owners Manual and Safety Instructions
Read and Save this Manual.
Keep this manual for the safety warnings and precautions. Refer to this manual for operating,
maintenance and inspection procedures. Log the items serial number on the front of this manual. Keep
purchase receipt with this manual in a safe dry location for future reference.
For help with this product please visit our website at
www.xrack.us/help or call 888-998-5739 or 516-338-0884
for assistance. Never overload the rated weight of the
vehicle's hitch capacity which may be lower than the rating
of the cargo carrier. Tools are not included for installation to
the vehicle.
WARNING
!
Do not operate with unstable loads
Do not load beyond rated capacity
Always strap load securely
Distribute load evenly
Do NOT sit, Stand or ride on
Do NOT exceed 65 MPH with Carrier attached
Follow DOT Guidelines for installation and use
Front Receiver Hitch for Bronco 6 Gen.
Model: FH-BR-HM
For Modular bumper High Mount winch plate or combatible installation.
ADVERTENCIA
!
No opere con cargas inestables
No cargue más allá de la capacidad nominal
Siempre cargue la carga de forma segura
DISTRIBUIR carga uniformemente
No se siente, se pare o monte
NO exceda 65 MPH con Carrier adjunto
Siga las pautas DOT para instalación y uso
X-RACK
Bethpage, NY USA
WARNING
READ THIS MANUAL BEFORE USING THIS
PRODUCT. FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY. SAVE THIS MANUAL
ADVERTISSEMENT
!
Ne pas utiliser avec des charges instables
Ne chargez pas au-delà de la capacité nominale
Toujours attacher la charge en toute sécurité
DISTRIBUER charge uniformément
Ne pas s'asseoir, se tenir ou monter sur
Ne dépassez PAS 104 kilomètres à l'heure avec le transporteur attaché
Suivez les directives des autorités pour l'installation et l'utilisation
info@xrack.us
v1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FH-BR-HM and is the answer not in the manual?

Questions and answers

Summary of Contents for XRACK FH-BR-HM

  • Page 1 For Modular bumper High Mount winch plate or combatible installation. For help with this product please visit our website at WARNING www.xrack.us/help or call 888-998-5739 or 516-338-0884 for assistance. Never overload the rated weight of the READ THIS MANUAL BEFORE USING THIS vehicle’s hitch capacity which may be lower than the rating...
  • Page 2 Installation Instructions Follow these instructions to install the Front Receiver Suggested tools: Hitch to your Bronco high winch mount. Release pressure on winch rope by disengaging winch and pull out about 1′ of rope to make sure winch does not move when bolts are loosened. Remove 4 bolts Fig.1 holding winch and confirm they are 10mx1.5 bolts.
  • Page 3 Safety Information 1. Read all instructions before using this product 2. Check for missing or damaged parts 3. Do not exceed the receiver hitch maximum load capacity as listed above. 4. Only use accessories with 2” receiver hitch or Proper reducing sleeve ***Vehicle hitch ratings may be lower than the hitches load capacity.
  • Page 4 LIMITED WARRANTY B&R Innovations, LLC (B&R) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.

Table of Contents