Description
Energy-saving mode
The power saving mode can be used to reduce power
consumption. The function is activated by default.
The energy saving mode can be deactivated or reactivated. Enter
the menu of the radio and proceed as follows:
Briefly press the menu button. Press the
monitor key four times.
The display shows
when the energy-saving mode is
activated and then
or
when the energy-saving mode is
deactivated.
The energy-saving mode can also be activated and deactivated
via the programming software.
Adjust the brightness of the LED display
Briefly press the menu key.
The display shows the current brightness level by the symbol
.
Use the UP/DOWN keys to set the desired brightness (from "1" to
"4").
Confirm the setting with the PTT button or by waiting about three
seconds.
Firmware version check
To view the firmware version of the radio, proceed as follows:
Briefly press the menu button. Press the
monitor key six times.
The firmware version is shown on the display.