Charge Battery - Maas PT-375 Operating Instructions Manual

Operation

Charge battery

The PT-375 is equipped with a 3.7 V/2300 mAh lithium-ion battery.
The battery can be charged on the radio or separately. Place the
radio in the larger holder of the table charger or the battery alone in
the smaller holder.
Plug the mains adapter into the mains socket and insert the
charging plug of the mains adapter into the DC socket of the table
charger.
It takes five to six hours to fully charge the battery. For maximum
battery life, it is recommended to charge the battery when the PT-
375 is switched off.
The use of chargers other than the one supplied may cause
damage to your radio or the battery, including explosion, fire and
personal injury. You can also charge the battery by connecting
the supplied USB cable to the micro USB port on the radio.
Then the LED indicator on the front of the radio lights up red during
charging and goes out when the battery is fully charged.
If you switch on the radio and then connect the micro-USB cable,
the display will show the battery charge status while the battery is
charging, just like a smartphone.
The battery saving function can reduce power consumption by up
to 50 per cent. When the radio is on, it is automatically activated if
the radio does not receive a signal for more than seven seconds.