IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
Assembly Precautions
1. Assemble only according to these instructions.
Improper installation can create hazards.
Installation Precautions
1. Follow all local, state, and federal regulations
regarding installation and use.
2. Park vehicle on a flat, level, hard surface well away
from traffic. Place transmission in park/neutral
and set parking brake.
3. Keep installation area clean and well lit.
4. Keep bystanders out of the area during installation.
5. The vehicle must have the appropriate
roof rails needed to securely and safely
mount the Cross Bars' Mounting Brackets.
Refer to vehicle's Owner's Manual.
WARNING: Use on vehicles with raised side rails
only. Do not use on vehicles with low-profile side
rails. Locking clamps should fully grip side rail.
Page 2
For technical questions, please call 1-888-866-5797.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
6. Install only according to these instructions.
Improper installation can create hazards.
7. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
8. Install Crossbars securely to vehicle
using supplied hardware only.
9. Do not install when tired or when under
the influence of drugs or medication.
10. Weight capacity and other product capabilities apply
to properly and completely installed product only.
Item 64877