Table of Contents
Advertisement
Sleep Timer
a. Press the button 15 to enter time mode
b. Press and hold the button 15 for 2 seconds to enter the sleep timer function setting. The sleep timer
timer shutdown time will be displayed on the monitor 1.
c. By press the button 15 continuously, this sleep timer time value can be setting as 90,80,70,60,50,40,30,20 or 10 minutes.
d. After the user selects a sleep timer time value among the 9 setting values, pause any operation and wait 2 seconds to save the
setting.
e. If there is no manual intervention, the radio will automatically turn off when the set time of the sleep timer comes. If you need to
turn off the radio earlier, press and hold the button 15 to turn off the radio.
a
Radio Band Selection
When the radio is on, press the band select button 5 continuously to choose different radio bands or mode, FM, VHF(NFM/WFM),
AM, SW, WB or BT (Bluetooth).
Adjust the Sound Volume
When the radio is on, press the volume+ button 16 continuously increases the volume; press the volume- button 17 continuously
decreases the volume. The monitor 1 shows the current volume level. which is divided into "V00-V32" levels.
Stored Memory Radio Station
a. Press the button 15 to turn on the radio.
b. Press the Band select button 5 to select different radio bands, FM, VHF(NMF/WFM), AM or SW.
c. Press and hold the stored memories button 4 for 2 seconds, the current band starts an automatic search and when a station is
detected, it is automatically stored in the memory space. Each band has 99 memory address (01-99). Total 396 memories.
d. When the storage is finished, press the stored memories+ button 8 or stored memories- button 9 to choose a memory address
you prefer (01-99).
b
Press and
hold for 2
seconds
a
b
c
d
Press
90
10
c
d
04
icon and the 90-minute
Wait 2 seconds
RF886
Advertisement
Table of Contents
