Charging The Buit-In Rechargeable Battery; Operation The Radio; Power Switch - Raddy RF886 User Manual

Charging the Buit-in Rechargeable Battery

1. When charging the rechargeable battery, connect the USB Type-C cable between the radio and the power supply.
2. Use 5V DC/1A-3A power adapter to charge the battery, full charge time is about 2-3 hours.
3. While charging, the power icon will flow from right to left continuously. When the battery is fully charge, the power icon will stop
flowing and appear as solid.
4. You can see the current battery capacity by looking at the power icon.
a. 3 cells power: 4.0-4.2V
b. 2 cells power: 3.75-4.0V
c. 1 cell power: 3.45-3.75V
d. 0 cell power: 2.75-3.45V, When power < 3.1V, the power icon will flash.
3.75-4.0V
4.0-4.2V
Cautions: Please charge the battery at least once a month.

Operation the Radio

Power Switch

a. Press the power button 15 on the side of the radio, the radio will enter time mode when it is turned on the very 1st time. Press the
button 15 again to turn the radio on to play.
b. While the radio is playing, press the button 15 to turn on the pause function, and press the button 15 again to cancel the pause
function.
c. To turn off the radio, please press and hold the button 15 for 2 seconds. Then it will enter the time mode.
Cautions: When turned off, the radio enters power saving mode and the monitor 1 goes off after 10 seconds. If checking the time,
press the button 15 to enter time mode.
a. Press
b. Press
c. Press
and hold
(2 seconds)
2.75-3.45V
< 3.1V Flash
3.45-3.75V
Monitor
Monitor goes off after 10 seconds
03
Monitor
RF886