Maintenance And Storage - GRE CSPAN Instruction Manual

6.2 Back filters cleaning
(1) Press and hold the button at the front end of the back filter to remove the whole filter cover from the body;
(2) Then take out the internal filter screen;
(3) Clean the internal filter screen;
(4) After cleaning, reinstall the internal filter screen as shown in the figure, and then assemble the filter cover
on the body.
1
6.3 Battery replacement
Unscrew the screws, take out the battery fixing
plate, gently press the battery power cord,
separate and replace the battery.
1

MAINTENANCE AND STORAGE

1. The battery discharges itself during storage. Make sure the cleaner is fully charged before storage.
2. When not in use, you must recharge the battery at least every three months.
• Unplug the external adapter from the socket and then the charging cable from the external adapter and the
cleaner.
• Remove the accessories from the cleaner. If necessary, rinse the cleaner and accessories with clean water. Do
not use detergent.
• Make sure the cleaner is drained before storage.
• Use a wet cloth to clean and dry the cleaner and its accessories.
• Store in a well ventilated place away from sunlight, heat, fire sources, pool chemicals and children.
• The storage environment temperature should be 10ºC – 25ºC (50ºF– 77ºF).
Note: higher temperature may shorten battery life.
2
2
Note: User must consult dealer before any
battery replacement.
3
3
Back filters
4