Inputs Page; Inputs - Encoders; Multi-Codec; Single Channel Mode - Sencore AFN Series User Manual

Inputs Page

Clicking the blue icon at the top left of the user interface brings up the inputs page.
This page allows the configuration of all the input settings.
Depending on the hardware configuration there may be multiple input options that
need to be configured. Multiple IP Interface / System Host Card - SHC0100 can be
present in a single chassis for multiple network input interfaces. Multiple SDI Input /
Video Encoder Card - VEC0301 can be present for dense encoder applications. Different inputs
will be defined by what slot the carrier is installed in.

Inputs - Encoders

VEC0301 Encoder Carriers have carrier level settings as well as encoder level settings. To edit
these settings, click on the Edit button in the top bar.

Multi-CODEC

CODEC can be changed to HEVC, AVC, or MPEG2. This CODEC is shared across all
encoders on the carrier.

Single Channel Mode

For UHD applications, Single Channel Mode is required. In this mode the four inputs can be
used for 3G-SDI inputs and combining them into one UHD video PID. 4K Parameters are found
under the first encoder Edit button:
Page 11 (36)
AFN Platform – User Manual