Berkeley LUX Instruction Manual

FILTER INSTALLATION

1. Before starting the machine, check if the filter
cotton is installed. If not, please do not use it.
Report to the manufacturer or seller.
2. Filter cotton should be cleaned regularly.

OPERATING INSTRUCTIONS

1. Assembled the machine as shown in the installation
instructions.
2. Make sure that the voltage used is the same as the
rated voltage of the product.
3. To achieve the best comfort, helmet can be
adjusted to different angles, as shown below
4. Press the main power switch:
■ When working program is ready, initial mode:
time display 25 minutes; temperature display: sixth
gear; the wind speed: first gear; the ion mode is off.
■ If the customer defaults to the initial mode, press
the start/stop button to start the machine;
customer needs to adjust the working time, press
the time to increase the key; adjust the working
temperature, press the"Temperature adjustment
button -" to lower the temperature. File; each time
you press the "Temperature adjustment button + "
to raise a temperature level.
5. When machine is running
■ Machine warm up time 2 mins, light stops flashing
after 2 mins. The indicator light on the headset will
turn on.
■ After 2 mins, the machine will be on working
mode, the time display shows the remaining time.
■ When remaining time shows 10 mins, the indicator
light will light up green.
■ When remaining time shows 1 min, the indicator
light on the headset will indicate red and green
lights at the same time. And it does not generate
heat and send air. Apart from the main power
switch, all keys will be locked.
6. Change the working program during operation
■ Time, temperature, and wind speed can be
changed during operation.
7. End of work mode
■ After the work is finished, the time display
becomes "0", the time electronic alarm beep 3
times, and the indicator light on the headset wil
lights up in green.

WARRANTEE CARD

Thank you for purchasing our product. From the date of
purchase, you will have three months of free repair after
sales service due to quality problem, but nxot
due to man-made damage. ATTENTION! When selling
the goods, customers and distributors shall fill in the
warrantee card, giving machine model number and
sales date. After confirming body parts, customers will
have free repair after-sales service.
Manufacturer
WAVE (CHINA) LTD
Manufacture Date
QA:
Agent
Model:
Machine Body No.:
Date of Purchase:
Contact Name:
Contect Number:
Contect Address:
Repair Item:
http:www.aycllc.com
LUX II
W A V - D R Y - 1 3 6
LUX
W A V - D R Y - 2 3 6