Advertisement
Maintenance and cleaning
Switch the cooler off at the socket.
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the
cabinet with a light soap solution and subsequently wipe dry. External surfaces can be
maintained using steel oil.
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the
stainless steel surfaces and the internal cooling system.
Clean the condenser and the compressor compartment using a vacuum cleaner and a stiff
brush.
Do NOT hose the compressor compartment with water as this can cause short circuits and
damage on the electrical parts.
Service
The cooling system is a hermetically sealed system and does not require supervision, only
cleaning.
If the cabinet fails to cool, check if the reason is a power cut.
If you cannot locate the reason to the failure of the cabinet, please contact your supplier.
Please inform model and serial number of the cabinet. You can find this information on the
rating label which is placed inside the cabinet in the top right hand side.
Disposal
Disposal of the cabinet must take place in an environmentally correct way. Please note
existing regulation on disposal. There may be special requirements and conditions which
must be observed.
DISTRIBUTED BY:
5
SOUTHERN
p: 0800 503 335 | w: www.southernhospitality.co.nz
HOSPITALITY
e: weborders@southernhospitality.co.nz
Advertisement
