Access HOME GLIDE User Manual page 24

20
Led behaviour
O
Flashing red
Flashing red
Constant green
Flashing green
Constant green
(a ter initiating a
call attempt)
NOTE
It is recommendable to check the working of the Call device by making a call
at a regular base.
When the call device is not working properly please contact a local authorized
service organisation.
Mooe Sound
Registered to a None
base station
Unregistered to None
a base station
Registered to a Single beep
base station every 20
seconds
Registered to a Dialing tone
base station
Registered to a Busy tone
base station
Registered to a None
base station
HomeGlide Stairli t - User Manual - Use
Cause
Standby mode
Module is not registered to a
base station
Module cannot find the base
station it is registered to (either
because it is out of range or
because the base station has
been disconnected)
Trying to establish a call
The far-end caller has
disconnected the call
There is no telephone line
connected to the base station