Access HOME GLIDE User Manual page 14

10
3.2.4 4-POiNT SAFETY BELT (OPTiONAL)
When using the 4-point safety belt for the first time, please follow these steps. A ter the
initial adjustment of the straps, it is only necessary to loosen and tighten the shoulder
straps to use the safety belt. An attendant is required to help to fasten the safety belt
and make the adjustments.
First use of the 4-point safety belt
1. Loosen all adjustable straps.
2. Sit down on the seat.
3. Move the shoulder straps over the shoulders.
4. Adjust the back strap until the cross point is on a comfortable place on the back and
the belt fits naturally over the shoulders.
5. Fasten the 4-point safety belt.
6. Adjust the belt parts on the front side by pulling the straps until they are tight, but
comfortable.
7. Adjust the shoulder parts by pulling the straps.
WARNING
Make sure that no loose ends can interfere with any moving parts.
8. Also fasten the standard safety belt (see 4.3 for more information).
9. Now you can use the stairli t.
Remove the 4-point safety belt
1. Release the standard safety belt and the 4-point safety belt.
2. If necessary, loosen the shoulder straps.
3. Take o the 4-point safety belt.
4. When the chair is not in use, fold the seat and fold in the armrests.
CAUTION
Make sure that no loose ends can interfere with any moving parts in case that
the stairli t will be moved by the Call-and-park control station.
HomeGlide Stairli t - User Manual - Description