Features; Contents And Accessories - Inter-m DSP-48 Operation Manual

Features

Features
- HIGH PERFORMANCE AUDIO INPUT AND OUTPUT
The DSP-48 consists of 4 in, 8 out XLR balanced I/O, and offers high-performance audio with dynamic
range of 108 dB or higher and frequency response characteristics with 24-bit 96 kHz sampling rate
and 32-bit floating point DSP processing technology.
- VARIOUS DSP FEATURES
Various input/output DSP functions are available, including delay, 8-band PEQ, 31-band GEQ, com-
pressor, matrix, crossover, limiter, gain, and mute.
- DISPLAY INPUT/OUTPUT LEVEL METER
The front LED shows the signal level of the input/output channel.
- EQUIPMENT CONTROL VIA FRONT INTERFACE (OLED AND CONTROL BUTTONS)
The front OLED DISPLAY and control buttons allow you to control the equipment, and each channel has
a mute button to mute the desired channel.
- PRESET AND EQUIPMENT LOCK FUNCTION
After you set the DSP value, you can save up to 50 settings as a preset. When saved, the preset name
supports alphanumeric characters, numbers, etc., and the saved date and time information are also
stored. It also has a lock function to prevent you from changing the value you set. The lock function can
be released by entering a user-set 6-digit password.
- GUI REMOTE CONTROL FEATURES
In addition to front interface control, remote control via wired Ethernet is possible. Integrated control
GUI software provides equipment control wherever the Ethernet network is connected.
- SAVE INSTALLATION SPACE
The standard 19-inch, 1U size enables efficient use of space when installing a rack.
- CONTACT INPUT
The two-pin euro terminal block allows the input of the contacts. All channels will be muted upon contact
input. It operates in a dry contact manner.

Contents and Accessories

Contents and Accessories
1. AC cord x 1EA
2. User's manual x 1EA
3. Euroblock Terminal (5 mm pitch, 2 pin) x 1EA
4. Rack mounting screw x 4 EA
DIGITAL SPEAKER PROCESSOR
DSP-48 3