Verkada GC31-E Install Manual page 3

Outdoor cellular gateway
Table of Contents

Advertisement

Introduction
What's in the box
Outdoor Gateway
Pole Straps (2 pcs)
Drive: Philips Screwdriver
3-Wire Cable Grommet for
DC Power (1 pc)
Attached to device
What you'll need
A smartphone or laptop
1/4 inch (6.5mm) drill bit for wall
anchors (if using mount plate)
1/8 inch (3mm) drill bit for pilot holes (if
using mount plate)
A Cat5 or Cat6 Ethernet cable with a
0.2-0.25 inch diameter (5-6.5mm)
3
Mount plate
T10 Security Torx
Screwdriver
3-5mm Cable Grommet (for
smaller DC adapter cables) (1 pc)
Connect
For easy registration and setup, scan the QR
code on the product.
If you prefer to manually register your product,
please proceed to:
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
N-Type Antennas (2
pcs)
Wall Anchors (4pcs)
Wall Screws (4 pcs)
7-9 mm Cable
Grommets (4 pcs)
verkada.com/start
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.

Advertisement

Table of Contents
loading

Related Products for Verkada GC31-E

Table of Contents