CONTENTS General Information & Safety Instructions ........... 3 Box Contents ...................... 3 Product Diagram ....................4 Before First Use....................4 Preparing For The Fridge Slide Install ............ 5 Tie Down the Fridge ..................6 Important Notes ....................6 Cleaning, Care, Storage & Maintenance ..........7 Specifications .....................
GENERAL INFORMATION & SAFETY INSTRUCTIONS Product introductions, safety warnings, & any other relevant information that doesn’t fit anywhere else in the manual. Any disposal or recycling instructions should be included here. Any major warnings or notes should be clearly addressed at the end of this section in the below method;...
PRODUCT DIAGRAM BEFORE FIRST USE Prior to using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product. We recommend you keep the original packaging for storing the product when not in use. Please pay close attention to the section entitled Important Safety and General Instructions.
PREPARING FOR THE FRIDGE SLIDE INSTALL Slide needs to be installed on a flat even surface with a minimum of 12m thickness. You will require the use of an electric drill to install the slide. 1. Open the slide by depressing the 2.
TIE DOWN THE FRIDGE Secure your fridge on the slide by using the 4 nylon straps supplied. Make sure the straps are tight and secure. IMPORTANT NOTES • The slide must be securely and evenly bolted down to the floor of the vehicle or to wherever the slide is to be used.
CLEANING, CARE, STORAGE & MAINTENANCE • Clean with a damp cloth. • Store away in a cool dry place away from dirt and debris. • Avoid impacts and keep threads and valve free from dirt and debris. SPECIFICATIONS...
WARRANTY INFORMATION Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose.
Need help?
Do you have a question about the GH1596 and is the answer not in the manual?
Questions and answers