Subscribe to Our Youtube Channel
Related Manuals for Lampert SMG
Summary of Contents for Lampert SMG
- Page 1 OPERATING MANUAL SMG/SMM Lampert Werktechnik GmbH Eye protection system Issue US 2023/03...
- Page 2 Welding microscope Product : SMG/SMM Typ: Manufacturer: Lampert Werktechnik GmbH Ettlebener Strasse 27 D-97440 Werneck, Germany E-Mail: mail@lampert.info Website: www.lampert.info Revision index: Date of revision:...
-
Page 3: Table Of Contents
Presentation of information ................. 11 Handling instructions .........................11 Application tip ..........................11 Norm conformity ....................12 Structure and function ..................13 Functional description ..................13 SMG/SMM microscope ..................14 Microscope head ........................15 Transport and storage ..................17 Transport ......................17 3/32 Issue US 2023/03... - Page 4 Storage ......................... 17 Commissioning ....................18 Setting up the SMG microscope ................. 18 Attach head rest and handpiece holding arm for SMG/SMM ......20 Adjusting the microscope ..................20 Requirements for the working environment ............21 Establishing supplies ................... 22 Functional test .....................
-
Page 5: Safety Regulations
Type of hazard (description and symbol of the hazard) • Consequences of the hazard (description of the consequences of the hazard) • Hazard prevention (measures to prevent the hazard) Type of hazard Consequences of hazard Hazard prevention 5/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 6: Safety Precautions-Read Before Using
Sparks fly off from the weld. • Use a Lampert welding microscope or any other Lampert or Lampert- certified eye protection system to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Stand- ards). -
Page 7: Safety Devices
The eye protection system must be properly connected to the welding de- vice in order to function properly. Always carry out a functional test before putting the microscope into opera- tion, see page 23in chapter 5. 7/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 8: During Operation
The eye protection system should always be covered after use to avoid soil- ing the oculars. During disassembly When dismantling, the connection cable plug must be unplugged from the corresponding socket on the welding device. 8/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 9: General Information
The eye protection system shall be used only when in flawless condition and is intended exclusively for work in accordance with the intended use. 9/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 10: Intended Use
2 General information 2.2 Intended use The unit is intended as personal protective equipment for arc welding of weldable metals and alloys with all compatible Lampert precision micro welding devices. 2.3 Foreseeable misuse • Use of the eye protection system without connecting the connection ca- ble to the device. -
Page 11: Presentation Of Information
The result symbol describes the result or intermediate result of an ac- tion. Application tip The " " indicates additional information for easy and safe use of the ma- chine. Note on the optimal use of the machine. TIP: 11/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 12: Norm Conformity
EU 2016/425, as the micro- scope is not worn or held by the user during operation. Therefore, a CE dec- laration of conformity is not possible. Lampert has nevertheless successfully performed all required and legally possible tests and examinations of EU 2016/425 and the above mentioned norms. -
Page 13: Structure And Function
The eye protection system protects your eyes from UV radiation, which in- herently originates during welding. It prevents the cornea from permanent and irreversible impairment. 13/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 14: Smg/Smm Microscope
Fig. 3.1 SMG/SMM microscope 1. Microscope head 2. Articulated arm with locking screw 3. Base plate with stand rod SMG 4. Magnetic base SMM (metal plate not included) Articulated arm with fix- The articulated arm is used for free alignment of the microscope. It can be fixed and loosened with the locking screw. -
Page 15: Microscope Head
The handpiece holding arm is used to fix the handpiece to the microscope. Handpiece holding arm This enables the workpiece to be easily closed in to the electrode for con- tacting during the welding process. 15/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... - Page 16 The appropriate interocular distance to the ocular can be adjusted on the prism housing. Dioptre adjustment With the dioptre adjustment, the eye protection system can be adjusted to the user's own visual acuity. 16/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual...
-
Page 17: Transport And Storage
(colder than -4 °F (-20 °C) or hotter than +131 °F (+55 °C)). To avoid contamination, the eye protection system should be covered during storage. 17/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 18: Commissioning
5 Commissioning Commissioning 5.1 Setting up the SMG microscope Remove the packaging completely. Attach the stand rod to the base plate with the supplied countersunk screw. Tighten the screw with the hex wrench until the stand rod is firmly attached to the plate. - Page 19 Push the articulated arm mount onto the stand rod from above up to the adjusting ring. Fix the articulated arm with the help of the clamping lever. Fig. 5.3 Attaching the articulated arm to the stand rod Now the SMG microscope is set up correctly. 19/32 Issue US 2023/03 Welding microscope SMG/SMM...
-
Page 20: Attach Head Rest And Handpiece Holding Arm For Smg/Smm
Adjust the head rest so that your head rests against it and the eye cups are Head rest adjustment only lightly touched. The headrest can be adjusted in height using the screw on the microscope and in depth using the screw directly on the support. 20/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 21: Requirements For The Working Environment
The device shall not be used outdoors. • The device shall be used in dry rooms only. • The device must be placed on a level (maximum angle of inclination 10°), stable and insulated surface. 21/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 22: Establishing Supplies
The circular connector for the eye protection system and the LED lighting is inserted in the connecting socket marked in yellow/red on the rear side of the Lampert fine welding device and tightened with the union nut until hand tight. -
Page 23: Help With Faults
Protective glass dirty Clean or exchange protective glass Focus is not retained The sight slides down Readjust the tension of the focusing wheel Tab. 6.1 Causes of errors and fault rectification 23/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 24: Care And Inspection Work
Replacing the protective glass To replace the protective glass, slide it forward out of the holder and re- place it with an original replacement protective glass. 24/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 25: Retightening The Microscope Brake
Fig. 7.2 Releasing the microscope brake Tighten the slotted screw again. The microscope brake works again and the microscope head holds its position on the stand rod. 25/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 26: Disposal And Recycling
Only for EU countries: In accordance with European directive 2012/19/EU regarding the disposal of used electrical and elec- tronic equipment, discarded electrical devices must be separated and col- lected and sent for recovery in an environmentally friendly manner. 26/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 27: Dimensions And Technical Data
9.1 Dimensions of the eye protection system Name Value Unit Weight 13.2 (6.0) Lb (kg) Dimensions Length 18.1-31.9 In (mm) (460-810) Width 6.3-31.9 In (mm) (160-810) Height 13.8-33.5 In (mm) (350-850) Tab. 9.1 Microscope dimensions 27/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 28: Technical Data
(-10 to +40) (°C) Relative humidity 0 – 80 % non-condensing Risk category acc. to 2016/425/EU Protection category acc. EN 379:2003 [6] 3/11 LWT 1/1/1/2/379 Tab. 9.2 Technical data for the welding microscope 28/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual... -
Page 29: Appendix
Ettlebener Strasse 27 97440 Werneck Germany mail@lampert.info 10.2 Spare and wear parts Only original spare and wear parts may be used for your SMG/SMM. These are listed in the Lampert spare parts catalogue and on the manufacturer's website. 29/32 Issue US 2023/03... - Page 30 10 Appendix 30/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual...
- Page 31 Appendix 10 31/32 Issue US 2023/03 Welding microscope SMG/SMM Operating manual...
- Page 32 All contents of these operating instructions, in particular text, photographs and graphics, are pro- tected by copyright. The copyright is held by Lampert Werktechnik GmbH, unless expressly stated otherwise. Lampert Werktechnik GmbH reserves the right to change this documentation and the descriptions, dimensions and technical data contained therein without prior notice.
Need help?
Do you have a question about the SMG and is the answer not in the manual?
Questions and answers