Binatone BAC-201 Operation And Installation Manual page 5

(a) - (c) can be injected through the mini water tank:
Water
Pull out water
pump holder
Instructions for Installation
2. Take out the main body from the water tank and inject clean water into the
water tank ( use the water without fragrance, essential oil, detergent or other
additive ) . Please don't surpass the max. water level indicatrix during water
injection ( MAX marker on the water tank ) as well as lower than the min. water
level indicatrix. The capacity of the water t ank is 20 liters which can ensure
operation for 35 - 44 hours ( as per environmental humidity ). If refrigeration
needs to be intensified, put the ice block or ice bag (frozen more than 8-10
hours) into the water tank.
(Notes: 1. Directly put the ice bag or ice block into the mini water tank
on the top to reach the best refrigeration effect. 2. Inject water into the
water tank before each operation and empty the water tank after each
operation.)
Ice bag
3. Lock the rear trundles. Install the main body on the water tank (control panel
upwards ; the direction of window blind is the same with that of water level
indicator window).
Front View
Instructions for Usage
Control Panelontrôle
4
Back View
Ice block