Subscribe to Our Youtube Channel
Related Manuals for Everwell CM9601A
Summary of Contents for Everwell CM9601A
- Page 1 CM9601A Digital Capacitance Meter INSTRUCTION MANUAL WARNING READ AND UNDERSTAND THIS MANUAL BEFORE USING THE INSTRUMENT.
- Page 2 1. GENERAL SPECIFICATIONS Measuring Method: Dual-Slope integration A/D converter system Display Method: LCD Maximum Display: 1999 counts (3 1/2 digits) with automatic polarity indication Over-range Indication: ”1” figure only in the display Low-Battery Indication: Automatic low-battery detection Measurement Rate: updates 2~3 sec Zero Adjust: manual-zeroing, about ±...
- Page 3 2. SAFE USE WARNING 2.1 Be sure that the battery and fuse are correctly placed. 2.2 The tested capacitor should be discharged before the testing procedure. 2.3 The polarity of the tested capacitor must be the same as the input terminal. 2.4 Never apply voltage to the input terminal, serious damage may result.
- Page 4 NOTE: 1) If the test capacitor is short, it will be over-range, and only figure “1” is displayed; for soaking-out capacitor, the reading will high its value; the open-circuit capacitor, will display “0”. (maybe±10pF at the 200pF range) 2) Display value will fluctuate if a soaking-out capacitor is connected.
- Page 5 WARRANTY This Instrument is warranted to be free from defects in material and workmanship for a period of one year. Any instrument found defective within one year from the delivery date and returned to the factory with transportation charges prepaid, will be repaired, adjusted, or replaced at no charge to the original purchaser.
- Page 6 www.everwellparts.com 10914 NW 33rd St, Miami, FL 33172 Phone: +1 (305) 406-2331 Fax: +1 (305) 406-2338 Email: info@everwellparts.com...
Need help?
Do you have a question about the CM9601A and is the answer not in the manual?
Questions and answers