Advertisement
POWER 7 V2- Setting and Operating Instructions
Important Note: All laptops must be switched off and closed before charging.
When powering up the LapCabby / Uni Cobby for the first time, depending on your time zone, the unit might automatically enter a timing
period, to ensure the LapCabby / UniCabby is in the correct time zone please follow the instructions below from item 2, or to reset
'Timers' follow instructions from 'Setting Timers' below.
The Power 7 timer allows you to charge your devices to timing periods that are suitable to your individual needs. You have three timer functions available,
these are:
Always on mode -
Constant power to your devices all the time
Manual Charge mode -
Deliver power to your devices at any time for a set amount for time
Timed Charge mode -
Deliver power to you devices at a time suitable to your requirements for an amount of time suitable to you.
Using your trolley for the first time
Plug the trolley into a socket with the IEC cable supplied.
Setting Time & Date
When the Power 7 is powered up, the main screen will display the time and date. If the time and date is incorrect, this can be adjusted by following the next
few steps.
- Press and hold the three control buttons for 5 seconds
- Set Clock? - Yes
- Use the + & - buttons to scroll through and select the correct date. Press the centre button to confirm
- Use the + & - buttons to scroll through and select the correct time. Press the centre button to confirm
Clock setting is now complete
Always on mode
- Press and hold the centre button for 5 seconds
- Always on? - Yes
The timer is now set in always on mode.
- To exit the always on mode, press and hold the centre button for 5 seconds
- Always on? - No
- Set manual time? - press the centre button to confirm
- Set timer 17 - Exit
Manual charge mode
- Press and hold the centre button for 5 seconds
- Always on? - No
- Use the + & - buttons to scroll through and select the required manual charge timer duration required to a maximum of 7 hrs 59 minutes. Press the centre
button to confirm,
- Set Timer 1? - Exit
- Set timer is now set
- Press and hold the + & - buttons together for 5 seconds to start manual charging
- To exit manual charge mode, press and hold the central button for 5 seconds
Timed charge mode
- Press and hold the centre button for 5 seconds
- Always on7 - No
- Set manual time - press the centre button
- Set timer 1? - Yes
- Select timer start time for Sunday using the + & - buttons to scroll through
- Use the + & - buttons to scroll through a suitable timing duration. If the timer is not required, press and hold the+ & - buttons together to turn the timer
off.
- Press the middle button to confirm
- Repeat the above process to programme timers for the rest of you week.
- The above process can be repeated for timer 2 and timer 3.
Important Note: A temperature sensor has been fitted to this LapCabby / UniCabby unit, power will cut out if the temperature inside the unit
°
°
exceeds 35
C (95
F) and will resume charging at approximately 29
Power]timer
Down
Centre/Confirm
Up
°
°
C (84
F)
Page 2
•
Advertisement
