Advertisement
Table of Contents
SP70 SOLDERING IRON GUN WITH MANUAL SOLDER FEED
SP70 PISTOL GRIP SOLDERING IRON
SP70 - Thermo-regulated soldering gun with manual solder feed, max. power 70 W.
It can accomodate both leaded and lead-free solder wires with diameters from Ø 0.7 to 1.7 mm.
At each trigger activation the wire advances toward the tip for a length that can be adjusted within a range of 1.0 - 4.0 mm.
A controller on the handle allow the operator to adjust power from 0% to 100%.
A red LED light indicates the correct functioning of the resistor.
Specifications
Max. power: 70 W, adjustable from 0% to 100% - PWM regulated
Max. operating temperature: 500 °C
Tolerance: ± 15 °C
Heating time (0/300°C): 3 minutes approx.
Supply voltage: 230 Vac, 50/60 Hz
Weight: 196 g (380 g with power cord)
Page: 1
(70W)
SKU: 650690A
Advertisement
Table of Contents
Related Manuals for Elmi SP70
Summary of Contents for Elmi SP70
- Page 1 SKU: 650690A SP70 PISTOL GRIP SOLDERING IRON SP70 - Thermo-regulated soldering gun with manual solder feed, max. power 70 W. It can accomodate both leaded and lead-free solder wires with diameters from Ø 0.7 to 1.7 mm. At each trigger activation the wire advances toward the tip for a length that can be adjusted within a range of 1.0 - 4.0 mm.
- Page 2 Solder-delivery tubes (1 x Ø 1 mm , 1 x Ø 1.7 mm) Power cable (3 x 0.75 mmq, 2 m length, with Schuko plug). SP70 is a replacement article for the following discontinued products: Weller WSF80 (T0051384899), Ewig TRM70.
Need help?
Do you have a question about the SP70 and is the answer not in the manual?
Questions and answers