Advertisement
SP70 SOLDERING IRON GUN WITH MANUAL SOLDER FEED
SP70 PISTOL GRIP SOLDERING IRON
SP70 Thermo-regulated soldering gun with manual solder feed, max. power 70W.
Works with Ø 1/1.7 mm diameter solder wires (both Sn/Pb and Lead-Free alloys).
At each trigger activation the wire advances toward the tip for a length that can be adjusted within a range of 1.0 - 4.0 mm.
A controller on the handle allow to regulate the power from 0% to 100%.
A red LED indicates that the element is working.
Specifications
Max. power: 70W adjustable from 0% to 100% - PWM regulated
Max. operating temperature: 500°C
Tolerance: ±15°C
Heating time (0/300°C): 3 minutes approx.
Supply voltage: 230Vac, 50/60 Hz
Weight: 196g (380g with power cord)
Page: 1
(70W MAX.)
SKU: 650690A
Advertisement
Table of Contents
Related Manuals for Elmi SP70
Summary of Contents for Elmi SP70
- Page 1 SKU: 650690A SP70 PISTOL GRIP SOLDERING IRON SP70 Thermo-regulated soldering gun with manual solder feed, max. power 70W. Works with Ø 1/1.7 mm diameter solder wires (both Sn/Pb and Lead-Free alloys). At each trigger activation the wire advances toward the tip for a length that can be adjusted within a range of 1.0 - 4.0 mm.
- Page 2 CH Hex key, 2mm Solder delivery tubes for Ø1mm and Ø1.5mm solder wires Power cable (3x0.75 mmq, 2m length, with Schuko plug). SP70 is a replacement article instead of the following discontinued products: Weller WSF80 (T0051384899), Ewig TRM70. Page: 2...
Need help?
Do you have a question about the SP70 and is the answer not in the manual?
Questions and answers