Table of Contents
Advertisement
Quick Links
TBUGGY300e: Snow Plow Assembly Pt.1
Unleash the relentless power of the Tomahawk Power Buggy Snow Plow, the ultimate winter warrior that
obliterates snowdrifts with unrivaled force, leaving behind a perfectly cleared path in its wake. To make the
assembly process a breeze, gather the tools you need for each step and thoroughly read the assembly
instructions for each step before starting.
PARTS NEEDED
A: Tomahawk Power Buggy
B: Snow Plow Blade
C: Rubber Guard
D: Plow Handle
E: Pivot Bar
F: Handle Rack
G: Fastener Kit
1
Remove all pieces from the kit
3
Fasten bolts using a 13mm wrench and
13mm socket with a torque wrench.
www.tomahawk-power.com
TOOLS NEEDED
1. 13mm Socket
2. 13mm Wrench
3. 19mm Wrench
4. Adjustable Wrench
5. Torque Wrench
2
Place the handle rack on the right side of the
Tomahawk Power Buggy.
4
Align the pivot bar with the holes at the base
of the bucket. Lock in place with a pin.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tomahawk TBUGGY300e
Summary of Contents for Tomahawk TBUGGY300e
- Page 1 TBUGGY300e: Snow Plow Assembly Pt.1 www.tomahawk-power.com Unleash the relentless power of the Tomahawk Power Buggy Snow Plow, the ultimate winter warrior that obliterates snowdrifts with unrivaled force, leaving behind a perfectly cleared path in its wake. To make the assembly process a breeze, gather the tools you need for each step and thoroughly read the assembly instructions for each step before starting.
- Page 2 TBUGGY300e: Snow Plow Assembly Pt.2 www.tomahawk-power.com Place the pivot pin in the pivot bar and secure Secure the plow handle in place with the bolt, washer, and in place with the lynch pin. nut- tighten with a 19mm wrench and adjustable wrench.
Need help?
Do you have a question about the TBUGGY300e and is the answer not in the manual?
Questions and answers