Table of Contents
Advertisement
Running Machine Care
Notes
¡ Run the Machine Care programme
without any tableware in the dish-
washer.
¡ Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡ Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡ For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.
¡ Follow the safety instructions given
on the packagings of the machine
care products and machine clean-
ers.
¡ Activate the
→ "Extra Clean Zone", Page 25
function.
Remove any coarse soiling in the
1.
interior with a damp cloth.
Clean the filters.
2.
Place the machine care product in
3.
the appliance interior.
Only use machine care products
specially designed for dishwash-
ers.
Pour the machine cleaner into the
4.
detergent dispenser until it is filled
completely.
Do not place any additional ma-
chine cleaner in the appliance in-
terior.
Press
.
5.
Press
.
6.
a Machine Care is run.
a Once the programme has ended,
the indicator for Machine Care
goes out.
Cleaning and servicing en
17.5 Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
3
2
1
Micro filter
1
Fine filter
2
Coarse filter
3
Cleaning filters
Soiling in the dishwashing water may
block the filters.
After each wash check the filters
1.
for residue.
Turn the coarse filter anticlockwise
2.
and remove the filter system
Check that no foreign objects
‒
fall into the sump.
.
2
1
43
Advertisement
Table of Contents
