CARING FOR ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution
in the environment. Please recycle packaging where facilities exist. Check with your local council authority for
recycling advice.
YOUR PRODUCT IS GUARANTEED FOR A MAXIMUM PERIOD OF 12 MONTHS FROM THE
ORIGINAL DATE OF PURCHASE AND IS INTENDED FOR DIY (DO IT YOURSELF) USE ONLY.
Warranty excludes consumable parts, (For example, bearings and O-rings, etc.)
30-DAY MONEY BACK GUARANTY
Within the first 30 days of purchase, you are allowed to return your product for a full refund.
30 DAYS TO 90 DAYS (3 MONTHS)
A defective unit will be replaced with a new one in accordance with the terms of this warranty, due to
manufacturing fault.
90 DAYS TO 12 MONTHS
Up to 12 months after purchase, we will provide speedy and effective online service.
WARNING!
The following actions will result in the warranty becoming void.
● If the tool has been operated on a supply voltage other than that specified on the tool.
● If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or
alterations.
● Failure to perform maintenance as set out within the user manual.
● If the product is disassembled or tampered with in any way.
● Professional, industrial or high frequency use.
ANY QUESTIONS, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER:
info@bielmeiertools.com
TO ENSURE THE QUICKEST RESPONSE POSSIBLE, PLEASE HAVE THE MODEL NUMBER AND
DATE OF PURCHASE AVAILABLE SO OUR CUSTOMER SERVICE REPRESENTATIVE CAN
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
Yongkang Huore Industry Trading Co., Ltd.
Email: info@bielmeiertools.com
Add: Yuanzhou, Jiangnan Street, Yongkan City,
Zhejiang, P. R. China 321300
ELECTRICAL SAFETY WARNINGS
WARNING! When using mains powered tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, personal injury and material
damage.
be cert
Be sure to save these instructions and any other documents supplied with this unit for future reference.
Note
: Bielmeier cordless tools are interchangeable for use in the Unit d States and Canada.
e
Note
replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety pr
ec
autions when operating this tool. The insulation system is added to
failure occur within the tool.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Work area safety
vite accidents.
proper safety.
Electrical safety
outlets will reduce the ri
sk of electric shock.
grounded.
cords increase the risk o
f electric shock.
suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
GFCL reduces the risk of electric shock.
Personal safety
alcohol or medication. A moment of inattention while operating power tools may result in serious personal
hat, or hearing protection ca
n reduce personal injuries.
e of
power tools with your finge
r on the switch or energizing power tools that have the switch n may lead to
ool on.
es.
moving parts resulting in serious injury.
and collection facilities, ensure these are connected and prop
y pack from the power tool before making any adjustments, changing
If damaged, have the power tool rep
WARRANTY
circuit breaker. If the supply cord is damaged, it must be
prevent against potential injury should an electrical
s create sparks which may ignite the dust or fumes.
the operator or bystanders if not exercising
tools. Unmodified plugs and matching
electric shock if your bady is earthed or
sharp edges or moving parts.Damaged or entangled
leakage current of 30 mA or less. Use of a
under the influence of drugs,
mask, non-skid safety shoes, hard
the unit to a
power source/battery pack. Carrying
accidents.
uations.
or long hair, can get caught in
USER MANUAL
4V Max Lithium ion
Cordless Staple Nail Gun
BCSG-4
WHAT'S IN THE BOX
Cordless Staple Gun
Tpy-c Charge Cable
WARNING! Please carefully read this user manual before operating the staple gun.
GENERAL POWER TOOL SAFETY WARNINGS
power tool for operations d
STAPLE GUN SAFETY WARNINGS
WARNING! This appliance is not intended for use by persons including children with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Always assume that the tool contains fasteners. Careless handling of the stapler or nailer can result in unexpected firing of fasteners and personal injury.
Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge the fastener causing an injury.
Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener may be deflected away from your t
arget.
Do not use this stapler or nailer for fastening electrical cable. It is not designed for electric cable installation and may damage the insulation of electric cables thereby
causing electric.Shock or fire hazards.
BATTERY AND CHARGER SAFETY WARNINGS
WARNING! This manual contains important safety and operating instructions
for your battery and charger.
Before using the charger, read all instructions and cautionary markings on the charger, battery pack and the
product using the battery pack.
This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution.
Since battery tools do not have to be plugged into an electric outlet, they are always in an operational condition. Be aware of possible hazards when not using the battery tool or
when charging accessories. Following this rule will reduce the risk of electric shock, fire and serious personal injury.
Do not place battery tools or batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
Do not crush, drop or damage the battery. Do not use a battery or charger that has been dropped or has received a sharpblow. A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
To avoid damage to the electric plug and cord when disconnecting the charger, be sure to pull by the plug and not the cord. Make sure the cord is placed where it will not be
stepped on, tripped over, or otherwise subjected to damage or stress.
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery will not reduce the risk.
A battery can explode if set near a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product near an open flame. If a
battery explodes, it can propel debris and hazardous chemicals. If exposed
to debris or chemicals, use water immediately to flush away particles/residue.
Do not charge battery tools in a damp or wet location. Do not use, store or charge battery or products in locations where the temperature is less than 50℉or more than 100℉.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash mmediately with soap and water. If liquid gets into your
eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
Never attempt to open the battery and charger for any reason. If the plastic housing of the battery pack or charger breaks or cracks, immediately discontinue use and do not recharge.
The battery is not fully charged out of the carton, first read the safety instructions and then follow the charging notes and procedures.
Save these instructions. Refer to them frequently and use them to educate others who may use this tool. If you loan this tool tosomeone, be sure they are familiar with these
instructions too.
s operation.
Staples x 1200
Brad Nails x 400
.
CUSTOMER SERVICE
info@bielmeiertools.com
MADE IN CHINA
(CONT.)
work to be performed. Use of the
Need help?
Do you have a question about the BCSG-4 and is the answer not in the manual?
Questions and answers
how do i turn it on and use it. ? if light is red is it charging?
To use the BIELMEIER BCSG-4:
1. Ensure the battery is charged. Plug the USB Type-C cable into the staple gun’s charging port.
2. Connect the other end to a power source (e.g., power bank, computer, or AC adapter).
3. While charging, the indicator light will be red.
4. When fully charged, the light turns green.
Yes, a red light indicates the battery is charging.
This answer is automatically generated
why is my Nailer not working it is fully charged and it was only used one time right after I purchased it?
If the BIELMEIER BCSG-4 nailer is fully charged and has only been used once but is not working, possible reasons based on the context include:
1. Power Switch Off: Ensure the ON/OFF power switch is turned ON.
2. Safety Striker Not Engaged: The tool uses a two-step Safety Striker System. It will only fire if the safety striker pin is fully depressed against the surface.
3. Magazine Empty or Jammed: Check that staples or nails are loaded properly and that the magazine is not jammed.
4. Dirt or Debris: Build-up may be interfering with operation. Clean the tool with a dry cloth.
5. Improper Use: Ensure it is not being used on electrical cables or other unsuitable materials.
If none of these apply, the tool may be defective or need servicing.
This answer is automatically generated
STAPLE GUN WILL NOT CHARGE. I GET A BLINKING RED LIGHT ONLY