BIELMEIER BCSK-4P User Manual

CARING FOR ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution
in the environment. Please recycle packaging where facilities exist. Check with your local council authority for
recycling advice.
YOUR PRODUCT IS GUARANTEED FOR A MAXIMUM PERIOD OF 12 MONTHS FROM THE
ORIGINAL DATE OF PURCHASE AND IS INTENDED FOR DIY (DO IT YOURSELF) USE ONLY.
Warranty excludes consumable parts, (For example, bearings and O-rings, etc.)
30-DAY MONEY BACK GUARANTY
Within the first 30 days of purchase, you are allowed to return your product for a full refund.
30 DAYS TO 90 DAYS (3 MONTHS)
A defective unit will be replaced with a new one in accordance with the terms of this warranty, due to
manufacturing fault.
90 DAYS TO 12 MONTHS
Up to 12 months after purchase, we will provide speedy and effective online service.
WARNING！
The following actions will result in the warranty becoming void.
● If the tool has been operated on a supply voltage other than that specified on the tool.
● If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or
alterations.
● Failure to perform maintenance as set out within the user manual.
● If the product is disassembled or tampered with in any way.
● Professional, industrial or high frequency use.
ANY QUESTIONS, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER:
info@bielmeiertools.com
TO ENSURE THE QUICKEST RESPONSE POSSIBLE, PLEASE HAVE THE MODEL NUMBER AND
DATE OF PURCHASE AVAILABLE SO OUR CUSTOMER SERVICE REPRESENTATIVE CAN
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR
PROCEDURE.
Yongkang Huore Industry Trading Co., Ltd.
Email: info@bielmeiertools.com
Add: Yuanzhou, Jiangnan Street, Yongkan City,
Zhejiang, P. R. China 321300
ELECTRICAL SAFETY WARNINGS
WARNING! When using mains powered tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, personal injury and material
damage.
Before operating the unit, carefully read the entire manual and be certain you know how to switch the unit off in case of an emergency.
Be sure to save these instructions and any other documents supplied with this unit for future reference.
Note: Bielmeier cordless tools are interchangeable for use in the United States and Canada.
Note: The power outlet used for the power tools/charger must be protected by a 30mA ground fault circuit interrupter or earth leakage circuit breaker. If the supply cord is damaged, it must be
replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is added to
failure occur within the tool.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Work area safety
■ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
■ Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
■ Keep children and bystanders at a safe distance while operating a power tool. Getting distracted while using the tool may lead to injury for the operator or bystanders if not exercising
proper safety.
Electrical safety
■ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed(grounded)power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
■ Avoid bodily contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your bady is earthes or
grounded.
■ Do not expose power tools to rain or wet conditions. Water entering a powe tool will increase the risk of electric shock.
■Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
■ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for out door use reduces the risk of ekectrric shock.
■ If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter(GFCI) protected supply with a rated leakage current of 30mA or less. Use of a
GFCL reduces the risk of electric shock.
Personal safety
■ Alwalys be sure to pay close attention to what you are doing when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
■ Use personal protective equipment. Always wear eye protection. Under the appropriate condition, protective equipment such as a dusk mask, non-skid safety shoes, hard hat, or hearing
protection can reduce personal injuries.
■ Prevent unintentional starting . Make sure the switch is in the off-position before picking up or carrying the tool or connecting the unit to a power source/battery pack. Carrying power
tools with your finger on the switch or energizing power tools that have the switch may lead to accidents.
■ Rremove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
■ Do not over reach. Keep proper footing and balance at all time. This enables better control of the power tool in unexpected situations.
■ Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair, can get caught in moving
parts resulting in serious injury.
■ If devices are provided for the connection of dust estraction and collection facilities, ensure these are connected and properly used.
Power tool use and care
■ Do not force the power tool. Use the correct power tool for your application. The correct power tool will do a better and safer job when used for its designed purpose.
■ Do not use the power tool if the on/off switch is malfunctioning. Any power tool that cannot be controlled with the swtich is dangerous and must be repaired.
■ Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
This help reduce the risk of starting the power tool accidentally.
■ Store idle power tool out of the reach of children. Do not allowe persons unfamiliar with the power tool to operate it without first reading these instructions. Power tools
are dangerous in the hands of untrained users.
■ Properly maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other conditon that may affect the power tools operation.
If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tool.
■ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

WARRANTY

prevent against potential injury should an electrical
USER MANUAL
4V Max Lithium ion
Cordless Staple Nail Gun
BCSK-4P
WHAT'S IN THE BOX
Cordless Staple Gun Tpy-c Charge Cable Staples x 1800
Brad Nails x 800
WARNING! Please carefully read this user manual before operating the staple gun.
GENERAL POWER TOOL SAFETY WARNINGS(CONT.)
Use the power tool, accessories, and tool bits, etc. By follpwing these instructions, taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could create a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the power tool is properly and safely maintained.
If the supply cord is damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons to prevent any potential hazard.

STAPLE GUN SAFETY WARNINGS

WARNING! This appliance is not intended for use by persons including children with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Always assume that the tool contains fasteners. Careless handling of the stapler or nailer can result in unexpected firing of fasteners and personal injury.
Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge the fastener causing an injury.
Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener may be deflected away from your target.
Do not use this stapler or nailer for fastening electrical cable. It is not designed for electric cable installation and may damage the insulation of electric cables thereby
causing electric.Shock or fire hazards.

BATTERY AND CHARGER SAFETY WARNINGS

WARNING! This manual contains important safety and opeerating instructions for you battery
and charger.
Before using the charger, read all instructions and cautionary markings on the charger, battery pack and the
product using the battery pack.
■ This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of fire, electric shock or electrocution.
■ Since battery tools do not have to be plugged into an electric outlet, they are always in an operational condition. Be aware of possible hazards when not using the battery tool or
when charging accessories. Following this rule will reduce the risk of electric shock, fire and serious personal injury.
■ Do not place battery tools or batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
■ Do not crush, drop or damage the battery. Do not use a battery or charger that has been dropped or has received a sharpblow. A damaged battery is subject to explosion.
Properly dispose of a dropped or damaged battery immediately.
■ To avoid damage to the electric plug and cord when disconnecting the charger, be sure to pull by the plug and not the cord. Make sure the cord is placed where it will not be
stepped on, tripped over, or otherwise subjected to damage or stress.
■ To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery will not reduce the risk.
■ A battery can explode if set near a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product near an open flame. If a
battery explodes, it can propel debris and hazardous chemicals. If exposed to debris or chemicals, use water immediately to flush away particles/residue.
■ Do not charge battery tools in a damp or wet location. Do not use, store or charge battery or products in locations where the temperature is less than 50℉or more than 100 ℉.
■ Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash mmediately with soap and water. If liquid gets into your
eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
■ Never attempt to open the battery and charger for any reason. If the plastic housing of the battery pack or charger breaks or cracks, immediately discontinue use and do not
recharge.
■ The battery is not fully charged out of the carton, first read the safety instructions and then follow the charging notes and procedures.
■ Save these instructions. Refer to them frequently and use them to educate others who may use this tool. If you loan this tool tosomeone, be sure they are familiar with these
instructions too.
.
CUSTOMER SERVICE
info@bielmeiertools.com
Clamp(4") x 2 Clamp(3") x 2 staple remover x1
MADE IN CHINA