YOTON Y7 - Video Projector Manual

Packing List

Product Introduction

Specifications

Projection Size

How to Get Clear Images

Adjust the keystone correction and focus wheel on the projector to obtain the satisfactory imaging effect.

When the image is blurred (see figure below), it is recommended to adjust the focus wheel to improve the clarity of the image.

When keystone distortion occurs (see figure below), it is recommended to adjust the keystone correction ring.

If satisfactory clarity cannot be achieved through adjustment, move the product forward or backward.

Start up and Shutdown

Please first plug the power cord into the projector and then insert the plug into the socket to avoid spark.
You can press "Power" button on the projector or on the remote control to start up or shut down the projector.

Note:
Please unplug the power cord in time after you have turn off the projector to save
Rotate the focusing ring into the device to ensure that the lens is fully contained inside the device.
Cover the dust-proof lens cap into the lens and store the device in a cool and dry place.

Signal Sources Switch

You can switch signal sources as below:

1. Press the "Input Source" button on the projector panel to display the input source selection menu.
2. Select the appropriate input source, and press the "OK" key on the projector panel or the remote control to confirm the selection.
   For example, if you want to connect a Fire TV Stick via HDMI input, you should choose "HDMI" as the signal source on the projector.

Note:
When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Make sure the cables are firmly inserted.

Bluetooth Connection

You can set the Bluetooth as below:

1. Open the projector and go to the "Setting"
2. Click the "Sound" Item and select "BT Setting" option, search and connect the projector with your Bluetooth sounds.
   

Troubleshooting

1. What if the image is not clear

If the image is not clear enough, adjust the focus wheel and keep the watching distance 1.2-3.6m.
If the bottom/top of the screen is blurry, or if half of the screen is not rectangular, adjust the ± 15° keystone correction.

2. What if there is no sound

All projectors in the market cannot support Dolby audio. If there is no sound, you can turn off Dolby audio on video website like Netflix. (Settings > Display & Sounds > Audio > Dolby Digital Output > Dolby Digital (OFF).

And some files which are coded by Dolby/AC3/DTS may not be able to play sound because of copyright issue. This is the characteristic for all projectors.

3. Can the device be used outdoors to watch movies?

Y7 can be used outdoors, but please make sure there is a socket, because the video projector needs a power cable to work (included).

4. The remote control does not work

Make sure the remote points at the IR receiver directly, and do not cover IR receiver.
Make sure you have inserted the battery(not included) into the remote control.
Because of Amazon's safety policy, the battery is not included in the package.

5. There is no icons on desktop/the screen is black when I connect to my computer.
   Please press "Win+P" and choose "Duplicate". Do not choose other modes like "Computer only".

6. Any other confusion

Please contact us for the following email address if you got any confusion about this projector.
support@yoton.co

Important Safety Warnings

The following safety instructions ensure the long service life of the projector to avoid fire or electric shock. Make sure to read them carefully and pay attention to all the following warnings.

1. Do not install the projector in sites with improper ventilation. Keep the back of the projector well ventilated so it can cool the system without problem. Do not block the ventilation holes.
2. Do not install the projector in dust and smoke sites. Do not install the projector near the temperature and smoke transducer. It may cause a sensor failure.
3. Do not install the projector in sites with direct blowing of warm and cool air-condition wind. Otherwise it may cause the project failure due to moisture condensation or temperature increment.
4. No water-proof function for this projector, apparatus like vase or cup should not be put around the projector.
5. No peeking into the lens while projectors is working.
6. Please turn off the projector and cut off the power supply, if it is not used for a long time.
7. To avoid risk of electronic shock, do not disassemble or repair the device. Incorrect repair may cause risk of electronic shock or injury to people during operating. If projector is defected, please contact our after-sale service team: support@yoton.co

You can find our contact information below:
support@yoton.co

Facebook

Instagram

Web

Youtube

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download YOTON Y7 - Video Projector Manual