Section 4: Stand Installation - Vivotek GFV24CB2 User Manual

Section 4: Stand Installation

1. Open the package and take out the product with foam still attached. Gently place
it on a desktop or table.
2. Take out the stand stem and attach the stand stem into the opening on the back,
then use the included screwdriver and two screws to fasten the stand stem to the
monitor.
3. Attach the stand base to the bottom of stand stem, and use two more screws
to fasten the stand base to the stand stem. Then remove the monitor from the
remaining foam section and stand it up on the desired surface.
If needed, the stand can easily be detached from the monitor by removing the
screws on the back of the monitor.
Screws x2
Stand Base
7
Stand Stem
Screws x2