Warranty; Limited Liability; Environmental Statement - Epec 6200 Technical Manual

1.4

Warranty

Information concerning the warranty of this product can be found from Epec General
Sales and Warranty Terms.
For more information, contact sales@epec.fi
1.5

Limited Liability

The manufacturer shall under no circumstances be liable for loss of production, loss of
profit, loss of use or any other consequential damages and/or indirect losses, whatever
their cause may be. In case claims based on product liability are brought against the
Manufacturer for which claims the manufacturer may be liable, the manufacturer's
liability is limited to the extent normally covered under normal product liability
insurances.
The buyer shall compensate the manufacturer to the extent that the manufacturer
might be liable to pay damages as a result of claims based on product liability
according to paragraph above.
1.6

Environmental Statement

The manufacturer has a certified ISO 14001: 2015 environmental management system
and certified processes to manufacture products. The manufacturer acts in an
environmentally responsible manner and always complies with valid environmental
legislation and directives.
The manufacturer is committed to comply with all relevant product regulations and
directives concerning product safety, and responsible sourcing of raw materials and
components.
The manufacturer undertakes to arrange for the recycling and scrapping of products
that are returned to the manufacturer by the buyer and/or products that are received
by the manufacturer in connection with maintenance services and deemed unusable by
the manufacturer.
This product complies with the European Community Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE) encouraging and setting specific criteria for
the collection, handling and recycling of electric and electronic waste. Outside of the
European Union, local guidelines for recycling shall be followed.
This product includes a lithium battery soldered on the PCB's bottom side
(placed on the upper right part of the PCB). When recycling the product,
make sure that the battery is removed from the PCB and recycled
separately.
Epec Oy reserves all rights for improvements without prior notice
Epec Oy
Phone: +358-(0)20-7608 111
Internet: www.epec.fi
Technical Manual and Cabling Instructions
Manual Code
Classification:
Postal address:
PL/P.O.Box 194
FIN-60101 Seinäjoki, Finland
Page 7
Public