Aquasanita Tesa 490 Installation Instructions

AQUASANITA
Installation instructions

INSTALLATION OVER THE COUNTERTOP

Congratulations on buying our product! Before using the sink, please carefully read and follow these
instructions.
These instructions are intended for stainless steel AQUASANITA and SILICSANA sinks installed over a
countertop.
if you have purchased a sink which is installed under a countertop, please read the
ATTENTION:
instructions for that type of sink.
before installing the sink, check whether it is not damaged .
NOTE:
that the template is presented as guidance only. In order to avoid errors, measure the length
REMEMBER
and width of the sink, turn it upside down and write down the dimensions with a marker. This will ensure
more precise cutting.
entrusting the installation of the sink to professionals who have specialized knowledge
WE RECOMMEND
and skills.
Follow the steps below to install the sink properly.

INSTALLATION

Template
The sinks installed over the countertop are suitable for all countertops
and are easy to install in the traditional manner.
Select the installation place for the sink. Make sure that the
01
surface is completely level and there is enough space under
the countertop to fasten the brackets. Place the template on
the countertop at the selected place, x it with scotch tape and
check whether it is in correct position. Outline the template
with a marker.
Drill 10 mm holes for a saw at all corners of the outline.
02
Use a suitable tool to cut an opening in the countertop
03
following the outline.