Advertisement
• Full keyboard and mouse functionality
• Allows ad hoc use of other computers from your AAC device
• Four User numbers to prevent interference.
IR Keyboard & Mouse works on any USB compatible computer but is primarily intended for PCs, Macs and
Chromebooks. It will work on iPads and iPhones (via an adapter cable), although some functions are not
supported by iOS. It can also work with some Android devices (via an adapter cable), depending on which
drivers are included in its operating system.
First of all, plug the IR Keyboard & Mouse into any available USB socket on the computer you would like to
control. It doesn't matter whether the computer is on or off. The first time you install IR Keyboard & Mouse
the operating system may take a few seconds to build a driver. There are no driver files to load onto the
computer- the computer's resident drivers are always used to help simplify installation.
Next, add the relevant Gridset or Pageset to Grid 3/ Communicator 5, as appropriate to your particular AAC
software and hardware. At present, three options are available to download from the Pretorian website...
• Grid 3 on Gridpad
• Grid 3 on I-Series
• Communicator 5 on I-Series
You can locate them easily using the QR code on the back page of these instructions. More options may be
made available over time if required.
Please refer to the instructions for your particular AAC device for information on how to add Gridsets/
Pagesets if you are unfamiliar with how to do this. Now start the AAC software and select the IR Keyboard &
Mouse Gridset/Pageset and you will see a grid/ page resembling a standard keyboard:
3
1
2
6
4
5
Compatibility
Installation
Features
Advertisement
