Related Manuals for Fike 10-2321
Summary of Contents for Fike 10-2321
- Page 1 FIKE REMOTE DISPLAY P/N 10-2321 Installation and Operating Instructions Manual P/N: 06-182 Rev. No: 6, 10/08...
- Page 3 Fike provides a one-year limited manufacturer's or in part, by any means without the prior express warranty on this product. The standard warranty written permission of the copyright owner. All Fike is printed in each Marketing Price List. documentation and hardware are copyrighted with warranty returns must be returned from an all rights reserved.
- Page 4 Tips – Tips provide advice that may save time during a procedure, or help to clarify an issue. Tips may include additional reference. Page ii FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
-
Page 5: Table Of Contents
Key Switch ..........................17 User Interface Buttons ......................17 Programmable Function Buttons .....................18 LED’s............................19 General Operation........................20 Factory Initialization .........................20 Servicing ..............................21 Checkout ..........................21 Maintenance..........................21 Troubleshooting ......................... 22-24 UL S3217 FIKE Remote Display Page iii FM 3020297 Manual P/N: 06-182 Rev 6, 10/08... - Page 6 TABLE OF CONTENTS FIKE This page intentionally left blank Page iv FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
-
Page 7: Section Page
Remote Display itself or adverse operating conditions caused by improper installation and programming. REVISION HISTORY Document Title: FIKE Remote Display, Installation and Operating Instructions Document Reorder Number: 06-182 Revision Section Date... -
Page 8: Terms Used In This Manual
This term is used to create the relationship between activation inputs to notification outputs and peripherals. Page 2 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297... -
Page 9: Product Overview
PRODUCT OVERVIEW PRODUCT OVERVIEW PRODUCT DESCRIPTION AGENCY STANDARDS AND COMPLIANCE The Fike Remote Display (P/N 10-2321) is an ancillary device that can be connected This Fire Alarm Control Panel complies to Fike’s CyberCat, CyberCat 50, Cheetah with the following NFPA standards: Xi and Cheetah Xi 50 control systems via NFPA 1 –... -
Page 10: Agency Standards And Compliance (Ul)
Requirements of the Local Authority Having Jurisdiction RELATED DOCUMENTATION To obtain a complete understanding of the specific features of the Fike Control System or to become familiar with related functions in general, refer to the documentation listed in Table below. -
Page 11: Equipment/Products
½” on all sides. The box could be ordered painted red for surface mounting requirements. • 10-2321 - FIKE Remote Display This assembly provides a printed circuit board assembly with keypad and display for mounting to a standard 5-gang masonry box. -
Page 12: Replacement/Spare Parts
STD protocols. Firmware version 3.0 and higher require the control panel to use EXP protocols. Refer to Operations Section 7.0 for further details. Page 6 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182... -
Page 13: Design
Reference NFPA 72 for testing methods and complete the project. frequency. UL S3217 FIKE Remote Display Page 7 of 24 FM 3020297 Manual P/N: 06-182 Rev 6, 10/08... - Page 14 DESIGN FIKE This page intentionally left blank Page 8 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
-
Page 15: Installation
If the module requires repair or return to Fike, it Unless otherwise detailed in this manual or in must be shipped in an anti-static bag. -
Page 16: Check Field Wiring With Ohmmeter
"critical operation" contacts prior to system testing may cause accidental activation of the system. Page 10 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297... -
Page 17: Connect Field Wiring To Internal Electronics
RS485 DEVICE OR EOL 100ohm INSTALL REMOTE DISPLAY ONTO BACKBOX Install the Remote Display into the back-box. Secure using the four provided self-tapping screws. UL S3217 FIKE Remote Display Page 11 of 24 FM 3020297 Manual P/N: 06-182 Rev 6, 10/08... -
Page 18: Apply Power And Configure Remote Display
Page 12 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297... -
Page 19: Programming
FIKE PROGRAMMING PROGRAMMING The FIKE Remote Display Unit, P/N 10-2321, If it is desired to program the RS485 address, user provides the ability to program eight different definable keys, custom message, buzzer enable, buttons for control of many of the Fire Control releasing countdown message type, or corporate System features. - Page 20 PROGRAMMING FIKE This page intentionally left blank Page 14 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
-
Page 21: Operations
The main Control System supervises the Remote Display. The top line on the Normal Standby Display C O R P O R A T E M E S S A G E will show ‘FIKE REMOTE DISPLAY’ (unless this message been changed through configuration menu or through C-Linx software). - Page 22 Z 0 0 1 R E L E A S E the Remote Display shows information for the one that releases first. Release Display Page 16 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
-
Page 23: Keyswitch
FIKE OPERATIONS KEYSWITCH The keyswitch uses a standard Fike key to NOTE: It is recommended that you switch from a “LOCK” status to an “ACCESS” do NOT leave the key inserted in status. Some user defined buttons require the Remote Display. This allows... -
Page 24: 7.4 Programmable Function Buttons
To exit this • ZONE DISABLE (p)(t) mode, once started, the panel must be reset. This function will disable/enable (toggle) a panel zone. Page 18 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297... -
Page 25: Leds
FIRE require a subsequent press of the SILENCE ALARM LED or clear an Alarm event. switch. UL S3217 FIKE Remote Display Page 19 of 24 FM 3020297 Manual P/N: 06-182 Rev 6, 10/08... -
Page 26: 7.6 General Operation
6 – Step Super 7 – Step All 8 – Walktest 4. The default corporate message for remote Display: “FIKE CORPORATION”. Figure 7.7 Page 20 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297... -
Page 27: Servicing
NFPA 72 – “Testing The training class provides Certification for Frequencies.” A permanent record shall be Installation, Service and Maintenance of the Fike maintained documenting all inspections, testing Panel. The certified individual performing the and maintenance. The components of the... -
Page 28: Troubleshooting
FIKE TROUBLESHOOTING and event. Refer to the Control System Product The FIKE Remote Display will provide a 20 Manual for a complete description of events and character description of an event. Each individual the proposed tips for resolution of each. - Page 29 (same as action is necessary. Change the Peripheral to pressing the remote keypad not allow access of switches if desired. SILENCE switch). UL S3217 FIKE Remote Display Page 23 of 24 FM 3020297 Manual P/N: 06-182 Rev 6, 10/08...
- Page 30 Change the mode (same as entering Peripheral to not allow access of switches if walktest from desired. control panel). Page 24 of 24 FIKE Remote Display UL S3217 Rev 6, 10/08 Manual P/N: 06-182 FM 3020297...
- Page 32 704 South 10 Street P.O. Box 610 Blue Springs, Missouri 64013 U.S.A. (816) 229-3405 (800)979-FIKE (3453) Fax: (816) 229-0314 http://www.fike.com...
Need help?
Do you have a question about the 10-2321 and is the answer not in the manual?
Questions and answers