Advertisement
SAFETY
The ground wire of the 3-wire ac power plug places the
Changing the supply voltage
The optional power cords are shown as follows in Fig. 4.
Line fuse
The fuse holder is located on the rear panel and contains
the line fuse. Verify that the proper fuse is installed by
replacing the line fuse.
Voltage conversion
This oscilloscope may be operated from either a 100 V to
240 V, 50/60 Hz power
source.
Use the following pro-
Plu
nfiguration
Power cord and plug type
Factory installed
Line cord
Parts No. for power
instrument fuse
plug fuse
cord and plate
ig co
7
North American
Cord:
(12 amp max; NEC)
Universal Europe
0.3 A, 250 V
220 volt/50 Hz
Fast blow
Rated 16 amp
5x 20 mm
U.K.
0.3 A, 250 V
240 volt/50 Hz
Fast blow
Rated 13 amp
5x 20 mm
0.3 A, 250 V
Fast blow
5x20 mm
Australian
240 volt/50 Hz
Rated 10 amp
North American
240 volt/60 Hz
Rated 15 amp
(12 amp max; NEC)
0.3 A, 250 V
Fast blow
AGC/3AG
Switzerland
0.3 A, 250 V
240 voit/50 Hz
Fast blow
Rated 10 amp
AGC/3AG
5x20 mm
Fig. 3 Power Input Voltage Configuration
Advertisement
