SEVR X2 Manual page 5

7. Allen wrench x1
8. Strain relief x2
9. Ferrules x5
Installation
3.2 Gather Tools
Required equipment
In addi�on, you will need the
following tools and accessories:
In addition you will need the following
tools and accessories:
1. Wire stripper
1. Wire stripper 2. Adjustable wrench
3. Voltmeter or digital mul�-meter
2. Adjustable wrench
(for measuring AC voltage at the
3. Voltmeter or digital multi-meter
installa�on site)
4. Level
4. Level
5. Drill
5. Drill
6. Knife
6. Knife
7. Wire crimper
7. Wire crimper
8. Phillips screwdriver
8. Phillips screwdriver
Circuit breaker options
Circuit breaker/Residual current device is to be selected in
accordance with relevant Australian standards.
Circuit Breaker Options Table
Output Amperage (A)
Circuit Breaker Options (A)
WARNING:
Please use the charger properly. Do not hit or press hard on the enclosure. If the case is damaged, please contact
a professional technician.
WARNING:
Improper connection of the equipment-grounding conductor would result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are not sure whether the product is properly grounded. Do not modify if it doesn't fit the
outlet, have a proper outlet installed by a qualified electrician.
CAUTION:
Use appropriate protection when connecting to the main power distribution cable.
The information contained in this document is the sole property of SEVR PTY LTD. Any reproduction in part or as a whole without the written permission of SEVR Holdings PTY LTD is
prohibited.
sales@sevr.com.au | www.sevr.com.au
5
1
5
Three Phase
32A
To be assessed on site
based on relevant Australian
standards
6 7
2 3
6 7
8 9
X2
4
8
4
5